Parameter can.vehicle.vin removed

    6 days later

    Parameter can.fuel.rate will be renamed to can.fuel.consumption
    Both parameters will be registered for 2 weeks until 30 March, 2020. Then can.fuel.rate will be removed

      25 days later
      a month later

      We've performed some architecture changes: now for all up-to-date Teltonika models (that reply with its HW type in getver command response) it is not necessary to register device with appropriate device type. If device is not registered, server will send "getver" command right after login packet received. If device responds with correct answer in HW specified field then the following parsing goes according to this device type.

      18 days later
      9 days later

      gsm.sim.iccid parameter parsing fixed: when LSB (ICCID 2, AVL ID 14) which Teltonika sends as number, started from zeros - these zeros were skipped in flespi. Now we force this tag to be 10 characters long string appended with leading zeros, so full ICCID combination results in valid 19 or 20 digits string.

        a month later

        • baja

        • Post #29
        • Edited

        AVL ID 375 from E-Scooter elements for TST100 will be ranamed in flespi parameters from external.battery.level to external.battery.capacity. Both parameters will be registered until July 15.

          7 days later

          The bug fixed in position registering for Codec8 and Codec16. If device is initialized and can't spot the satellites (e.g. inside the building) it send zero coordinates. flespi registered it as parameters position.latitude = 0 and position.longitude = 0. Which lead to inconsistent data for device messages. From now zero coordinates will not be stored.
          A bug with unregistered zero parameter also fixed for position.direction and position.altitude parameters

            20 days later

            • namo

            • Post #31
            • Edited

            Teltonika protocol updated:

            • added Unlock Bluetooth Lock setting, Actions tab
            • added new AVL_IDs:
              871 - BLE Lock status - flespi parameter ble.lock.status
              872 - BLE Lock Battery - flespi parameter ble.lock.battery.level
            • AVL_ID 352 now stored in flespi parameter scooter.battery.level
              Applicable for TST100 device.

              • namo

              • Post #32
              • Edited

              Teltonika protocol updated: Freezer AVL_IDs added for FMB640, FMC640 and FMM640 devices.

              Mapping of AVL_IDs to flespi parameters is below:

              • 10040 - Fuel Level - is registered as freezer.fuel.level
              • 10041 - Battery Voltage - is registered as freezer.battery.voltage
              • 10042 - Total Electric Minutes - is registered as freezer.electric.total
              • 10043 - Total Vehicle Minutes - is registered as freezer.vehicle.total
              • 10044 - Total Engine Minutes - is registered as freezer.engine.total
              • 10045 - Zone 1 Alarm Type - is registered as freezer.zone1.alarm.type
              • 10046 - Zone 1 Alarm Code - is registered as freezer.zone1.alarm.code
              • 10047 - Zone 1 Return Air Temperature 1 - is registered as freezer.zone1.return.air.temperature.1
              • 10048 - Zone 1 Supply Air Temperature 1 - is registered as freezer.zone1.supply.air.temperature.1
              • 10049 - Zone 1 Temperature Setpoint - is registered as freezer.zone1.temperature.setpoint
              • 10050 - Zone 1 Evaporator Coil Temperature - is registered as freezer.zone1.evaporator.coil.temperature
              • 10051 - Zone 1 Return Air Temperature 2 - is registered as freezer.zone1.return.air.temperature.2
              • 10052 - Zone 1 Supply Air Temperature 2 - is registered as freezer.zone1.supply.air.temperature.2
              • 10053 - Zone 1 Operating Mode - is registered as freezer.zone1.operating.mode
              • 10054 - Zone 2 Alarm Type - is registered as freezer.zone2.alarm.type
              • 10055 - Zone 2 Alarm Code - is registered as freezer.zone2.alarm.code
              • 10056 - Zone 2 Return Air Temperature 1 - is registered as freezer.zone2.return.air.temperature.1
              • 10057 - Zone 2 Supply Air Temperature 1 - is registered as freezer.zone2.supply.air.temperature.1
              • 10058 - Zone 2 Temperature Setpoint - is registered as freezer.zone2.temperature.setpoint
              • 10059 - Zone 2 Evaporator Coil Temperature - is registered as freezer.zone2.evaporator.coil.temperature
              • 10060 - Zone 2 Return Air Temperature 2 - is registered as freezer.zone2.return.air.temperature.2
              • 10061 - Zone 2 Supply Air Temperature 2 - is registered as freezer.zone2.supply.air.temperature.2
              • 10062 - Zone 2 Operating Mode - is registered as freezer.zone2.operating.mode
              • 10063 - Zone 3 Alarm Type - is registered as freezer.zone3.alarm.type
              • 10064 - Zone 3 Alarm Code - is registered as freezer.zone3.alarm.code
              • 10065 - Zone 3 Return Air Temperature 1 - is registered as freezer.zone3.return.air.temperature.1
              • 10066 - Zone 3 Supply Air Temperature 1 - is registered as freezer.zone3.supply.air.temperature.1
              • 10067 - Zone 3 Temperature Setpoint - is registered as freezer.zone3.temperature.setpoint
              • 10068 - Zone 3 Evaporator Coil Temperature - is registered as freezer.zone3.evaporator.coil.temperature
              • 10069 - Zone 3 Return Air Temperature 2 - is registered as freezer.zone3.return.air.temperature.2
              • 10070 - Zone 3 Supply Air Temperature 2 - is registered as freezer.zone3.supply.air.temperature.2
              • 10071 - Zone 3 Operating Mode - is registered as freezer.zone3.operating.mode
              • 10350 - Ambient Air Temperature - is registered as freezer.air.temperature
              • 10351 - Coolant Temperature - is registered as freezer.coolant.temperature
              • 10352 - Error Count - is registered as freezer.error.count
              • 10353 - RPM - is registered as freezer.compressor.rpm
              • 10354 - RPM - is registered as freezer.compressor.state
              • 10355 - Door status - is registered as freezer.door.status
              • 10356 - Installation Serial - is registered as freezer.installation.serial
              • 10357 - Trailer Serial - is registered as freezer.trailer.serial

              namo
              Mapping for Freezer IO parameters is updated.

                  14 days later

                  minor update in parsing 875 flag for GH5200 device: if AVL ID 875 length is 14 symbols then it means that 875 contains not MAC address but IMEI of violating device, thus it would be stored in proximity.violation.ident parameter.

                    20 days later

                    • namo

                    • Post #35

                    New settings added for Teltonika TST100, Configuration tab: Scooter speed limits for Normal, Eco and Sport modes.

                      • namo

                      • Post #36

                      Reset device setting added to Teltonika TST100, TMT100, TFT100 and GH5200 devices, Actions tab.
                      Setting sends cpureset command to the device.

                        12 days later

                        • namo

                        • Post #37

                        New setting added for Teltonitka FMC130: Network Ping, Connectivity tab.

                        • namo replied to this.

                          • namo

                          • Post #38
                          • Edited

                          Teltonika devices FMB130, FMC130, FMU130 and FMM130 now have a possibility to configure 3 digital outputs (at Input/Output settings tab):

                            24 days later

                            namo
                            Network Ping Timeout setting, Connectivity tab, is added for Teltonika FMB120 and FMB920 devices.

                                10 days later

                                • namo

                                • Post #41
                                • Edited

                                AVL ID 381 Ground Sense is supported for Teltonika protocol.
                                It's registered as a boolean parameter negative.input.status: true - negative input is connected to the ground, false - not connected.