Meitrack protocol is supported in flespi telematics hub. The list of supported devices Meitrack MD500S Meitrack MD511H Meitrack MD522S Meitrack MD533S Meitrack MD811H Meitrack MD822S Meitrack MT90 Meitrack MT90G Meitrack MVT100 Meitrack MVT340 Meitrack MVT380 Meitrack MVT400 Meitrack MVT600 Meitrack MVT800 Meitrack P88L Meitrack P99G Meitrack T1 Meitrack T3 Meitrack T32 Meitrack T311 Meitrack T322X Meitrack T333 Meitrack T355 Meitrack T366 Meitrack T366G Meitrack T399L Meitrack T622 Meitrack T633L Meitrack TC68S

Meitrack protocol updated: CCE command type is supported. This is applicable for P99G , TC68S and other devices.

CCC command type is supported for meitrack protocol. This is applicacle for Meitrack T322X device type.

Time Zone setting added for the following devices, Actions tab: Devices Meitrack MT90 Meitrack MVT100 Meitrack MVT340 Meitrack MVT380 Meitrack MVT600 Meitrack MVT800 Meitrack T1 Meitrack T32 Meitrack T311 Meitrack T322X Meitrack T333 Meitrack TC68S

Parameter ID 0x40 New event code is supported for CCE command type. Applicable for Meitrack TC68S

E91 command type is supported for meitrack protocol: read device's firmware version and serial number. Applicable for the following devices Meitrack MT90 Meitrack MT90G Meitrack MVT100 Meitrack MVT340 Meitrack MVT380 Meitrack MVT600 Meitrack MVT800 Meitrack P99G Meitrack T1 Meitrack T3 Meitrack T32 Meitrack T311 Meitrack T322X Meitrack T333 Meitrack T355 Meitrack T366 Meitrack T366G Meitrack T622 Meitrack TC68S Firmware version and serial number are stored in Device Information setting, Info tab:

New parameters IDs are supported for CCE command type: 0x92 - can.wheel.speed 0x99 - can.engine.rpm 0x9C - can.engine.coolant.temperature 0xC9 - can.fuel.consumption.distance Applicable for Meitrack TC68S

Parameter ID 0x4A is supported for CCE command type: additional info about the ignition off event. The information is registered in the following parameters: trip.mileage trip.duration trip.average.speed trip.max.speed Applicable for Meitrack TC68S

New device supported: Meitrack P88L

Meitrack protocol is updated: fixed parsing of wifi.signal.strength parameter.

The protocol will be affected by the change in type of parameters gsm.mcc and gsm.mnc to be installed in 2 weeks - May 23rd, 2022: both parameters that now have type "string" will be stored as "number". The possible leading zeroes in MNC will be ignored (e.g. the value "01" will be stored as 1)

[Changelog] meitrack protocol

namo

Meitrack protocol is updated: fixed parsing of Param ID 0X0E Base station info of CCE command type. 2 bytes <RX_LEVEL> are now parsed as signed integer (flespi parameter gsm.signal.dbm)

namo

Meitrack protocol is updated: added Param ID 0x29 Fuel Level of Command type CCE - flespi parameter fuel.level is registered

baja

Change in parsing of the indexed Wi-Fi related parameters:
wifi.mac.address.{index}
wifi.signal.strength.{index}
The first reported WiFi access point will be stored without index, like wifi.mac.address, wifi.signal.strength. The next access points will be reported starting from index 1.

YuryAheichyk

Authorize RFID/iButton key, Delete RFID/iButton key, List of RFID/iButton keys settings (RFID tab) are added for devices:
Meitrack MD500S
Meitrack MD511H
Meitrack MD522S
Meitrack MD533S
Meitrack MD811H
Meitrack MD822S

YuryAheichyk

Meitrack protocol is updated: added Param ID 0x42 Input port status of Command type CCE - flespi parameter din is registered

baja

Extended field 0xFE of type 0x36 known as "call record" parsing added for fields:
call.type
call.type.enum
call.phone.number
call.timestamp
call.duration

EvgenyShatilo

Fixed case of D13 command parsing which could cause unexpected command response behavior.

YuryAheichyk

Meitrack protocol has been updated, added 0x39 Magnetic card reader parameter (flespi name magnetic.card.data)

EvgenyShatilo

New setting C03 - GPRS Event transmission mode is added for models (MD500S,MD511H,MD522S,MD533S,MD811H,MD822S,)

EvgenyShatilo

Minor improvements to parsing extended tags for the CCE package that blocked parsing.
The change is available for tag 0xFE60.

YuryAheichyk

Custom Command added.
Custom GPRS command and Custom SMS command are now obsolete and will be removed in 2 weeks - 28.06.24

YuryAheichyk

YuryAheichyk update installed, the old Custom GPRS command and Custom SMS command have been removed

baja

CCE ID 0x4C responsible for analog input voltage parsing added

baja

CCE ID 0x68 parsing to x.tilt.angle, y.tilt.angle and z.tilt.angle added

Correct command response parsing for the command CC7 added

baja

Custom command updated: additional check for command_type parameter added: it can not be longer than 3 characters.