The protocol will be affected by the change in type of parameters gsm.mcc and gsm.mnc to be installed in 2 weeks - May 23rd, 2022: both parameters that now have type "string" will be stored as "number". The possible leading zeroes in MNC will be ignored (e.g. the value "01" will be stored as 1)
Meitrack protocol is updaed:
Several new Meitrack devices are supported: Meitrack MD500S, Meitrack MD511H, Meitrack MD522S, Meitrack MD811H, Meitrack MD822S
New device model is supported Meitrack T399L
New device model is suppored Meitrack T633L
The following parameters IDs are supported for command type CCE:
Meitrack protocol is updated: the following CAN parameters are added for command type CCE:
For Meitrack T-366 and T-366G devices the parsing of analog input value has been fixed.
New parameters battery.voltage and external.powersource.voltage may present in the telemetry message from now while ain.X parameters with previously incorrect values are not more available.
Meitrack protocol is updated:
Meitrack protocol is updated: fixed parsing of Param ID 0X0E Base station info of CCE command type. 2 bytes <RX_LEVEL> are now parsed as signed integer (flespi parameter gsm.signal.dbm)
Meitrack protocol is updated: added Param ID 0x29 Fuel Level of Command type CCE - flespi parameter fuel.level is registered
Change in parsing of the indexed Wi-Fi related parameters:
The first reported WiFi access point will be stored without index, like wifi.mac.address, wifi.signal.strength. The next access points will be reported starting from index 1.
Authorize RFID/iButton key, Delete RFID/iButton key, List of RFID/iButton keys settings (RFID tab) are added for devices:
Meitrack protocol is updated: added Param ID 0x42 Input port status of Command type CCE - flespi parameter din is registered
Extended field 0xFE of type 0x36 known as "call record" parsing added for fields:
Fixed case of D13 command parsing which could cause unexpected command response behavior.
Meitrack protocol has been updated, added 0x39 Magnetic card reader parameter (flespi name magnetic.card.data)
New setting C03 - GPRS Event transmission mode is added for models (MD500S,MD511H,MD522S,MD533S,MD811H,MD822S,)