Concox protocol has advanced support level in flespi telematics hub. Supported devices are below Jimi IoT (Concox) HVT001 Jimi IoT (Concox) GT230 Jimi IoT (Concox) GT300 Jimi IoT (Concox) GK309E Jimi IoT (Concox) Qbit Jimi IoT (Concox) Qbit-M Jimi IoT (Concox) GK310 Jimi IoT (Concox) Q2 Jimi IoT (Concox) GT710 Jimi IoT (Concox) AT1 Jimi IoT (Concox) AT2 Jimi IoT (Concox) AT3 Jimi IoT (Concox) AT4 Jimi IoT (Concox) AT4U Jimi IoT (Concox) AT5 Jimi IoT (Concox) AT6 Jimi IoT (Concox) CT10 Jimi IoT (Concox) GT03A Jimi IoT (Concox) GT03C Jimi IoT (Concox) GT06N Jimi IoT (Concox) GT06E Jimi IoT (Concox) GT06F Jimi IoT (Concox) GT100 Jimi IoT (Concox) GT800 Jimi IoT (Concox) GT08 Jimi IoT (Concox) MOPLUS Jimi IoT (Concox) GV20 Jimi IoT (Concox) GV40 Jimi IoT (Concox) JV200 Jimi IoT (Concox) WeTrack2 Jimi IoT (Concox) WeTrack Lite Jimi IoT (Concox) X1 Jimi IoT (Concox) X3 Jimi IoT (Concox) BL10 Jimi IoT (Concox) BL11 Jimi IoT (Concox) OB22 Jimi IoT (Concox) EG02 Jimi IoT (Concox) ET25 Jimi IoT (Concox) JS40 Jimi IoT (Concox) JC200 Jimi IoT (Concox) JM-VG01U Jimi IoT (Concox) JM-VG02U Jimi IoT (Concox) JM-VL01 Jimi IoT (Concox) JM-VL03 Jimi IoT (Concox) JM-VL04 Jimi IoT (Concox) JM-LL01 Jimi IoT (Concox) JM-LL303 Jimi IoT (Concox) JM-LL305 Jimi IoT (Concox) JC400 Jimi IoT (Concox) JM-VL103 Jimi IoT (Concox) JM-VL802 Jimi IoT (Concox) JM-VL502 Jimi IoT (Concox) JC261 Jimi IoT (Concox) JC450 Jimi IoT (Concox) JC181 Jimi IoT (Concox) JM-VL501 Jimi IoT (Concox) JM-VL512 Jimi IoT (Concox) JM-VL106 Jimi IoT (Concox) JM-VL162 Jimi IoT (Concox) VG502 Jimi IoT (Concox) JM-VL02 Jimi IoT (Concox) JC371 Jimi IoT (Concox) JM-VL110C Jimi IoT (Concox) JM-LL705 Jimi IoT (Concox) JM-LL306 Jimi IoT (Concox) JM-LL309 Jimi IoT (Concox) JM-VL808 Jimi IoT (Concox) JC451 Jimi IoT (Concox) JC182 Jimi IoT (Concox) PL200 Jimi IoT (Concox) LG300 Jimi IoT (Concox) PL601

New settings added for Concox GT06N device: Overspeeding Alarm Vibration Alarm GPS Data Upload Interval

Concox AT6 : fixed parsing of the following settings: Static Mode Cover Remove Alarm Vibration alarm Tamper Alarm Battery Alarm

One more setting parsing is fixed today for Concox AT6 device: Heartbeat Interval

New configuration settings added for the Concox GT08 device, tab Tracking : GPS Data Upload Heartbeat Interval Angle Report

Concox protocol updated: GT03A : timezone setting parsing fixed.

we've added a logic to correctly parse wrong timestamps caused by GPS Rollover problem This problem is caused because GPS date is defined by 10-bit week number which results to max 1024 number. So when this number overflows to 0 then tracker (with firmware algorithms not covering this) starts to send time as it is in the beginning of the 1024 week period which is August 21, 1999.

Concox protocol updated: JV200 : timestamp parsing fixed: timezone shift is not applied.

Concox timestamp parsing fixed: timezone shift is not applied for the following devices: WeTrack Lite X3 ET25 GT300 Q2 GT800

New device supported for concox protocol: Concox JC200

Concox protocol is updated: Information types 0x7 and 0x8 are supported for Data Transfer Common Packet (protocol number 0x94) Device information settings are added for Concox JC200

[Changelog] concox protocol

YuryAheichyk

Added new setting for JC261 and JC400 devices to configure loading of event media

namo

Concox protocol is updated: parameter can.brake.pedal.status is renamed into can.pedal.brake.status.
Both old and new parameters will be registered until 18-Aug-2025.

YuryAheichyk

Added Wakeup query action setting for JC450

namo

Concox protocol is updated: fixed parsing of SENALM command's response.

namo

New device type supported: Jimi IoT (Concox) JM-VL162

YuryAheichyk

Added Timesync setting for JC261, JC400, JC450

namo

Concox protocol updated: added new settings for JM-VL162 device type:

Connectivity tab:

@server4 - Server Setup

Info tab:

@version - Device FW Version

Configuration tab:

@odometer - Mileage Statistics
@led_switch - LED Switch Control
@speed_limit - Limit Max Speed

Tracking tab:

@analog_interval - Analog Input Data Interval
@distance - GPS Tracking Distance
@gpsdup - Force Report Location When Parked

Actions tab:

@check - Check command
@gps_activate - GPS ON command
@query_lbs - Query LBS command
@factory - Factory reset command
@reset - Restart device command
@defence - Activate/Deactivate Defence Mode

Alarm tab:

@vibr_alarm_vl103 - Vibration Alarm
@move_alarm_vl103 - Displacement Alarm

namo

Concox protocol is updated. The following settings are added for Jimi IoT (Concox) JM-VL162 device type:

Alarm Tab:

@overspeed_alarm_jm_vl162 - "Overspeeding Alarm"
@speedcheck_alarm_jm_vl162 - "Harsh Acceleration/Deceleration Alarm"
@swerve_jm_vl162 - "Harsh Turning Alarm"
@collision_alarm_jm_vl162 - "Collision Alarm"
@rollover_alarm_jm_vl162 - "Rollover Alarm"
@pull_alarm_jm_vl162 - "Removal Alarm"
@ovspeed_alarm_15_jm_vl162 - "15km/h Overspeed Alert"

Actions Tab:

@remote_engine_start - "Remote Engine Start"
@lock_vehicle - "Lock/Unlock Vehicle"

YuryAheichyk

Added new devices:

baja

bugfix (typo in parameter name): abnormal.tier.pressure.alarm renamed to abnormal.tire.pressure.alarm

YuryAheichyk

Added new device Jimi IoT (Concox) PL601

namo

Concox protocol is updated: fixed parsing of timestamp parameter for protocol number 0xA0 (160) for JM-VL802 device type.