Concox protocol has advanced support level in flespi telematics hub. Supported devices are below Jimi IoT (Concox) HVT001 Jimi IoT (Concox) GT230 Jimi IoT (Concox) GT300 Jimi IoT (Concox) GK309E Jimi IoT (Concox) Qbit Jimi IoT (Concox) Qbit-M Jimi IoT (Concox) GK310 Jimi IoT (Concox) Q2 Jimi IoT (Concox) GT710 Jimi IoT (Concox) AT1 Jimi IoT (Concox) AT2 Jimi IoT (Concox) AT3 Jimi IoT (Concox) AT4 Jimi IoT (Concox) AT4U Jimi IoT (Concox) AT5 Jimi IoT (Concox) AT6 Jimi IoT (Concox) CT10 Jimi IoT (Concox) GT03A Jimi IoT (Concox) GT03C Jimi IoT (Concox) GT06N Jimi IoT (Concox) GT06E Jimi IoT (Concox) GT06F Jimi IoT (Concox) GT100 Jimi IoT (Concox) GT800 Jimi IoT (Concox) GT08 Jimi IoT (Concox) MOPLUS Jimi IoT (Concox) GV20 Jimi IoT (Concox) GV40 Jimi IoT (Concox) JV200 Jimi IoT (Concox) WeTrack2 Jimi IoT (Concox) WeTrack Lite Jimi IoT (Concox) X1 Jimi IoT (Concox) X3 Jimi IoT (Concox) BL10 Jimi IoT (Concox) BL11 Jimi IoT (Concox) OB22 Jimi IoT (Concox) EG02 Jimi IoT (Concox) ET25 Jimi IoT (Concox) JS40 Jimi IoT (Concox) JC200 Jimi IoT (Concox) JM-VG01U Jimi IoT (Concox) JM-VG02U Jimi IoT (Concox) JM-VL01 Jimi IoT (Concox) JM-VL03 Jimi IoT (Concox) JM-VL04 Jimi IoT (Concox) JM-LL01 Jimi IoT (Concox) JM-LL303 Jimi IoT (Concox) JM-LL305 Jimi IoT (Concox) JC400 Jimi IoT (Concox) JM-VL103 Jimi IoT (Concox) JM-VL802 Jimi IoT (Concox) JM-VL502 Jimi IoT (Concox) JC261 Jimi IoT (Concox) JC450 Jimi IoT (Concox) JC181 Jimi IoT (Concox) JM-VL501 Jimi IoT (Concox) JM-VL512 Jimi IoT (Concox) JM-VL106 Jimi IoT (Concox) JM-VL162 Jimi IoT (Concox) VG502 Jimi IoT (Concox) JM-VL02 Jimi IoT (Concox) JC371 Jimi IoT (Concox) JM-VL110C Jimi IoT (Concox) JM-LL705 Jimi IoT (Concox) JM-LL306 Jimi IoT (Concox) JM-LL309 Jimi IoT (Concox) JM-VL808 Jimi IoT (Concox) JC451 Jimi IoT (Concox) JC182 Jimi IoT (Concox) PL200 Jimi IoT (Concox) LG300 Jimi IoT (Concox) PL601 Jimi IoT (Concox) KL100

New settings added for Concox GT06N device: Overspeeding Alarm Vibration Alarm GPS Data Upload Interval

Concox AT6 : fixed parsing of the following settings: Static Mode Cover Remove Alarm Vibration alarm Tamper Alarm Battery Alarm

One more setting parsing is fixed today for Concox AT6 device: Heartbeat Interval

New configuration settings added for the Concox GT08 device, tab Tracking : GPS Data Upload Heartbeat Interval Angle Report

Concox protocol updated: GT03A : timezone setting parsing fixed.

we've added a logic to correctly parse wrong timestamps caused by GPS Rollover problem This problem is caused because GPS date is defined by 10-bit week number which results to max 1024 number. So when this number overflows to 0 then tracker (with firmware algorithms not covering this) starts to send time as it is in the beginning of the 1024 week period which is August 21, 1999.

Concox protocol updated: JV200 : timestamp parsing fixed: timezone shift is not applied.

Concox timestamp parsing fixed: timezone shift is not applied for the following devices: WeTrack Lite X3 ET25 GT300 Q2 GT800

New device supported for concox protocol: Concox JC200

Concox protocol is updated: Information types 0x7 and 0x8 are supported for Data Transfer Common Packet (protocol number 0x94) Device information settings are added for Concox JC200

[Changelog] concox protocol

bird

Fixed parsing of ADAS (0x64) and DSM (0x65) extension coordinates in JT/T808 0x0200 location reports — hemisphere sign from status word is now correctly applied for JC371, JC181, JC182, JC451, VG502, and JM-VL502 devices. Previously, position.latitude and position.longitude in ADAS/DSM alarm messages could have incorrect sign in the Southern and Western hemispheres.

bird

JT808 E8 sub extension support for jc181, jc450, jc371, jc451, jc182:

0x2000 GSM base station data: gsm.mcc, gsm.mnc, gsm.lac, gsm.cellid, gsm.signal.dbm (indexed for multiple stations)
0x2001 LTE base station data: gsm.mcc, gsm.mnc, gsm.tac, gsm.cellid, network.signal.rsrp (indexed for multiple stations)
0x2004 Transparent transmission: rfid.code (BCD-coded RFID)
0x2006 Peripheral information: fuel.sensor.value (indexed by sensor channel, type-dependent division), sensor.temperature
Fixed 0x2006 to support multiple peripheral items per packet

bird

Fixed 12-bit alarm ID parsing for VL169, JM-VL103, JM-VL802, and JM-VL110C devices. Extended alarm codes (>255) like 0x0107 (263) and 0x01E5 (485) now correctly populate alarm.code parameter.

bird

JC371 server configuration setting changed from setting.server4 to setting.server5. The old setting.server4 never worked for JC371 devices (parse always failed on read). The new setting.server5 correctly reads and writes server configuration for JC371.

bird

Fixed parsing of 0xA9 WiFi Alarm packet for PL601, PL200, JM-LL309 devices — 4G LTE cell station data is now parsed correctly (previously caused disconnects)
JM-LL309 device type now supports 0xA9 WiFi Alarm packet
New parameter power.on.reason added from heartbeat extension module 0x0032 (Device startup status)

bird

New parameter payload.text added for terminal status synchronization (module code 0x04) in information transfer packets (0x9C and 0x94). Previously this data was silently skipped. The payload contains ASCII key=value pairs with device configuration state (alarm settings, defense status, geofence config, SOS numbers, IMSI, ICCID, etc). Content varies by product — users can extract specific fields via msg-pvm-code plugins.

bird

Bugfix in BL10 gps_upload_ival setting: removed unsupported ival2 parameter (was always rejected by device), corrected unit from "minutes" to "seconds" and range from 1-300 to 5-18000 to match device specification.

bird

New parameters gsm.jamming.event and gnss.jamming.status added for JM-VL103, JM-VL110C, and JM-VL802 devices in alarm packets.

bird

Fixed JC450 ADAS/DSM extension coordinate hemisphere sign for devices in Southern/Western hemisphere.

bird

New parameter external.battery.voltage added for JC261 devices in 0x70 (Extension Data Packet), module 0x0027.

bird

Fixed parsing of TIMER setting response for bl10, gv40, jm_vl103, jm_vl110c, jm_vl162, jm_vl802 devices

bird

New settings for JC371 (Alarm tab): adas_switch / dms_switch / face_switch — ADAS, DMS and Face Recognition (FRS) function switches; eventset_afif — face recognition detection parameters (sensitivity, fail duration, interval); eventalert_afis / eventalert_afif — face recognition success/failure reporting and voice alert intervals; and face library management actions: face_shot (capture and enroll), face_download, face_delete, face_check (list), face_test.