Concox protocol has advanced support level in flespi telematics hub. Supported devices are below Jimi IoT (Concox) HVT001 Jimi IoT (Concox) GT230 Jimi IoT (Concox) GT300 Jimi IoT (Concox) GK309E Jimi IoT (Concox) Qbit Jimi IoT (Concox) Qbit-M Jimi IoT (Concox) GK310 Jimi IoT (Concox) Q2 Jimi IoT (Concox) GT710 Jimi IoT (Concox) AT1 Jimi IoT (Concox) AT2 Jimi IoT (Concox) AT3 Jimi IoT (Concox) AT4 Jimi IoT (Concox) AT4U Jimi IoT (Concox) AT5 Jimi IoT (Concox) AT6 Jimi IoT (Concox) CT10 Jimi IoT (Concox) GT03A Jimi IoT (Concox) GT03C Jimi IoT (Concox) GT06N Jimi IoT (Concox) GT06E Jimi IoT (Concox) GT06F Jimi IoT (Concox) GT100 Jimi IoT (Concox) GT800 Jimi IoT (Concox) GT08 Jimi IoT (Concox) MOPLUS Jimi IoT (Concox) GV20 Jimi IoT (Concox) GV40 Jimi IoT (Concox) JV200 Jimi IoT (Concox) WeTrack2 Jimi IoT (Concox) WeTrack Lite Jimi IoT (Concox) X1 Jimi IoT (Concox) X3 Jimi IoT (Concox) BL10 Jimi IoT (Concox) BL11 Jimi IoT (Concox) OB22 Jimi IoT (Concox) EG02 Jimi IoT (Concox) ET25 Jimi IoT (Concox) JS40 Jimi IoT (Concox) JC200 Jimi IoT (Concox) JM-VG01U Jimi IoT (Concox) JM-VG02U Jimi IoT (Concox) JM-VL01 Jimi IoT (Concox) JM-VL03 Jimi IoT (Concox) JM-VL04 Jimi IoT (Concox) JM-LL01 Jimi IoT (Concox) JM-LL303 Jimi IoT (Concox) JM-LL305 Jimi IoT (Concox) JC400 Jimi IoT (Concox) JM-VL103 Jimi IoT (Concox) JM-VL802 Jimi IoT (Concox) JM-VL502 Jimi IoT (Concox) JC261 Jimi IoT (Concox) JC450 Jimi IoT (Concox) JC181 Jimi IoT (Concox) JM-VL501 Jimi IoT (Concox) JM-VL512 Jimi IoT (Concox) JM-VL106 Jimi IoT (Concox) VG502 Jimi IoT (Concox) JM-VL02

New settings added for Concox GT06N device: Overspeeding Alarm Vibration Alarm GPS Data Upload Interval

Concox AT6 : fixed parsing of the following settings: Static Mode Cover Remove Alarm Vibration alarm Tamper Alarm Battery Alarm

One more setting parsing is fixed today for Concox AT6 device: Heartbeat Interval

New configuration settings added for the Concox GT08 device, tab Tracking : GPS Data Upload Heartbeat Interval Angle Report

Concox protocol updated: GT03A : timezone setting parsing fixed.

we've added a logic to correctly parse wrong timestamps caused by GPS Rollover problem This problem is caused because GPS date is defined by 10-bit week number which results to max 1024 number. So when this number overflows to 0 then tracker (with firmware algorithms not covering this) starts to send time as it is in the beginning of the 1024 week period which is August 21, 1999.

Concox protocol updated: JV200 : timestamp parsing fixed: timezone shift is not applied.

Concox timestamp parsing fixed: timezone shift is not applied for the following devices: WeTrack Lite X3 ET25 GT300 Q2 GT800

New device supported for concox protocol: Concox JC200

Concox protocol is updated: Information types 0x7 and 0x8 are supported for Data Transfer Common Packet (protocol number 0x94) Device information settings are added for Concox JC200

[Changelog] concox protocol

YuryAheichyk

YuryAheichyk changes have been applied, the can.dtc parameter type changed to array

namo

Concox protocol updated:

fixed parsing of response of Vibration Alarm setting for Jimi IoT WeTrack2
disabled sending server ack for terminal's reply to server command (packet number 0x15), as server ack is not needed according to the protocol documentation

baja

parameter renaming announcement which will happen in a week (May 22):
parameter language.enum will be renamed to language

namo

New device type is supported: Jimi IoT (Concox) JM-LL305

namo

Concox protocol updated: parameter vehicle.type.enum is renamed to vehicle.type.
Please, use new parameter name in your integrations.
For backward compatibility, both new and old parameters will be registered until 2024-Jun-27.

The updated is applicable for the following Jimi IoT (Concox) device types: VG502, JC181, JC450, JM-VL502

namo

Concox protocol updated: fixed parsing of parameter gnss.realtime.status for protocol number 0x10.

namo

Concox protocol updated: fixed parsing of command response for JM-VL103

YuryAheichyk

Added Wakeup query action setting for JC181 devices

YuryAheichyk

Changes have been made to the concox protocol, for JC181 and JC450 devices. Now the Time zone setting fields will not be updated when receiving a timezone value in a telematic message and if this value has not changed

YuryAheichyk

Added settings for BL11 device

YuryAheichyk

Fixed 0x70 Location packet parsing from BL11

YuryAheichyk

Added Vibration Alarm and Displacement Alarm settings for JM-VL103