JM-VL04 commands update. The following commands have been added:
Concox protocol updated. Fixed Working mode setting (Tracking tab) for JM-LL01 and JM-LL02
Concox protocol has been updated, new devices added:
Concox protocol has been updated, added 0x000A Charging voltage and 0x000B Battery temperature status id parsing from JM-LL301, JM-LL302, JM-LL303, JM-LL701, JM-LL702 devices
Concox protocol has been changed, added Speed parameter parsing for Report of alarm and driving behavior data 0x03 report from JM-VL502
Concox protocol has been updated, added battery.level parameter for JM-LL01, JM-LL02 devices
Concox protocol has been updated, added JM-VL02 device
Update parsing #gsm.signal.dbm parameter for the type 0x70. Previously, the calculation was performed incorrectly without taking into account the sign of the value. This parameter shows the cellular signal strength in dbm. Such values must be presented in negative form. The change has been agreed upon with the hardware manufacturer. Example: previous value 50, now it will be -50 dbm.
Fixed date and time parsing of 0xA0 - GPS Location Packet (UTC, 4G Base Station Data) report from JM-VL512
Concox protocol updated: fixed Working Mode settings, Traking tab for Jimi IoT AT1
The protocol will be affected by the change in parameter can.dtc to be installed in 2 weeks - Mar 15th, 2024: the parameter can.dtc is currently of string type and will be converted to type array with separate DTC codes.
Added parameter can.dtc.array as an example of future implementation of can.dtc
YuryAheichyk changes have been applied, the can.dtc parameter type changed to array
All changes were applied in accordance with the manufacturer's recommendations.
Concox protocol updated: