I'm glad to announce the integration of sinocastel protocol in flespi!
The following devices are supported:
Information about sinocastel protocol updates will be posted here.
We've released sinocastel protocol improvement: alarms report is supported now.
Sinocastel protocol updated: DTC (Diagnostic Trouble Codes) report is supported.
Sinocastel protocol updated: Snapshot/Frozen frame data report is supported.
This report carries data read from OBDII interface.
Snapshot/Frozen frame data report is fixed for the case, when Number of PID types is 0.
Sinocastel protocol updated: settings Query Response packet is supported.
Sinocastel protocol updated: PID data packet is supported.
Sinocastel protocol updated: fixed the position.latitude and position.longitude parameters sign
Additional OBD-II PIDs are supported for sinocastel protocol.
Sinocastel protocol updated: added parsing of TLV 0x1705: International mobile subscriber identity (IMSI)
Sinocastel protocol updated: G-Sensor data packet is supported (accelerometer data)
Sinocastel protocol updated: protocol IDs 0xD004 and 0xD005 supported - Firmware upgrade result
vehicle.vin parameter parsing added
OBD pids 2123(fuel pressure) and 214F(oxygen sensor max values) parsing added
OBD-II PIDs supported:
Supported OBD-II PID 0x2102: DTC that caused freeze frame data capture - parameter can.freeze.dtc
Supported OBD-II PID 0x2112: commanded secondary air status - parameter can.secondary.air.state
The following OBD-II PIDs are supported:
Sinocastel protocol updated:
Parameters power.on.event and power.off.event are replaced by power.on.status parameter: