This is a changelog topic for geometris protocol. The list of supported devices: whereQube AVL whereQube ENG whereQube OBD 87 whereQube OBD 87S whereQube OBD 88 whereQube OBD 96

Below is the list of currently supported Packet Items of Geometris protocol, and their mapping to flespi parameters : 1 ICCID - gsm.sim.iccid 2 EVENT UTC TIME - event.timestamp, s 3 LATITUDE DEGREES - position.latitude, degrees 4 LONGITUDE DEGREES - position.longitude, degrees 7 UNIQUE ID (sequence number) - event.seqnum 8 LOCATION AGE - position.fix.age, s (converted to seconds) 9 REASON TEXT - report.code 10 REASON CODE - report.reason 11 IGNITION - engine.ignition.status 13 SPEED KMH - position.speed, km/h 14 SPEED MPH - position.speed, km/h 15 SPEED MPS - position.speed, km/h 16 HEADING ALPHA (N,S,E,W translation of heading) - rhumb 17 HEADING DEGREES - position.direction, degrees 21 TRUE_ODOMETER_KM - vehicle.mileage, km 22 TRUE_ODOMETER_MILES - vehicle.mileage, km 23 ODOMETER KM - gnss.vehicle.mileage, km 24 ODOMETER MILES - gnss.vehicle.mileage, km 28 SERIAL NUMBER - ident 36 EVENT_UNIX_TIME - timestamp, s 40 IOSTATES - din 46 LOC_HDOP - position.hdop 50 SATELLITES - position.satellites 51 IGNITION DURATION - engine.motorhours, h 53 BATTERY VOLTAGE - external.powersource.voltage, volts 54 INTERNAL BATTERY VOLTAGE - battery.voltage, volts 55 TOTAL_IDLE_DUR - total.idle.seconds, s 56 FENCE ID - geofence.id 57 ALTITUDE - position.altitude, m 59 TEMPERATURE - device.temperature, celsius 61 ODOMETER CHANGE (KM) - segment.vehicle.mileage, km 62 ODOMETER CHANGE (MILES) - segment.vehicle.mileage, km 63 CELL INFORMATION MCC:MNC:CI:LAC - gsm.mcc , gsm.mnc , gsm.cellid , gsm.lac 68 CELL RSSI - gsm.signal.dbm, dBm 70 ENGINE RPM - can.engine.rpm, rpm 71 ENGINE COOLANT TEMPERATURE - can.engine.coolant.temperature, celsius 72 ENGINE SPEED - can.vehicle.speed, km 73 ENGINE ODOMETER - can.vehicle.mileage, km 74 VEHICLE IDENTIFICATION NUMBER - vehicle.vin 75 FUEL LEVEL - can.fuel.level, percentage 76 ECU_ACTIVE_DTC - can.active.dtc.mil.status, boolean , can.active.dtc.number , can.active.dtc.1 , can.active.dtc.2 etc 77 THROTTLE POSITION N- can.throttle.position, percentage 78 BATTERY VOLTAGE - can.battery.voltage, volts 79 AMBIENT TEMPERATURE - can.ambient.air.temperature,celsius 80 CUMULATIVE FUEL ECONOMY - can.cumulative.fuel.economy, km/liters 81 TRIP FUEL ECONOMY - can.trip.fuel.economy, km/liters 82 CURRENT FUEL ECONOMY - can.fuel.economy, km/liters 89 ECU_ALL_DTC - can.mil.status, boolean , can.dtc.number , can.dtc.1 , can.dtc.2 etc

Geometris protocol updated, the following packet items supported: 91 J1939 Engine Hours - can.engine.motorhours, hours 92 J1939 Total fuel used - can.fuel.consumed, liters 93 J1939 Total gas used - can.gas.consumed, kg 94 J1939 Idle hours (Total) - can.total.engine.idle.time, hours 95 Total PTO hours - can.powesource.takeof.duration, hours 96 Max Vehicle speed limit - ecu.speed.limit, km/h 97 J1939 Oil Temperature - can.engine.oil.temperature, celsius 98 J1939 Engine oil level - can.engine.oil.level, percentage 99 J1939 Coolant level - can.engine.coolant.level, percentage 100 J1939 Diesel exhaust fluid level - can.adblue.level, percentage 101 J1939 Diesel exhaust fluid temperature - can.adblue.temperature, celsius 102 DPF_SOOT_LOAD - can.dpf.soot.load, percentage 103 DPF_TIME_SINCE_LAST_ACTIVE_REGENERATION - can.dpf.regeneration.time, seconds 104 DPF_SOOT_LOAD_REGENERATION_THRESHOLD - _can.dpf.regeneration.threshold, percentage__ 107 TRANSMISSION_OIL_LEVEL - can.transmission.oil.level, percentage 108 TRANSMISSION_OIL_TEMPERATURE - can.transmission.oil.temerature, celsius 109 TRANSMISSION_CURRENT_GEAR - can.gear 110 SEATBELT_SWITCH - can.seatbelt.status, boolean 111 ECU_ODOMETER_KM - can.vehicle.mileage, km 112 ECU_SPEED_KM - can.vehicle.speed, km/h 113 J1939_CRUISE_CONTROL_STATE_TIME - can.total.cruise.control.time, hours 114 J1939_CRUISE_CONTROL_STATE - can.cruise.control.state 115 DM1 - can.dm1.mil.status , can.dm1.dtc.number , can.dm1.dtc.1 , can.dm1.dtc.2 etc according to the number of DTC codes recevied 116 DM2 - can.dm2.mil.status , can.dm2.dtc.number , can.dm2.dtc.1 , can.dm2.dtc.2 etc according to the number of DTC codes recevied 118 ECU_IDLE_FUEL_USED - can.fuel.idle.consumed, liters 119 ECU_TRIP_FUEL_USED - can.trip.fuel.consumed, liters 120 J1939_TRIP_GAS_USED - can.trip.gas.consumed, kg 121 TPMS_ All Tires: -- AXEL TIRE - tire -- PSI - tire.pressure.psi, psi -- TEMPERATURE - tire.temperature, celsius -- AIR LEAKAGE RATE - tire.leakage.psi, psi -- FAULT: --- TIRE_LEAK - tire.leak.status, boolean --- TIRE_STAT_ERROR - tire.error.status, boolean --- TIRE_LOW_BATTERY - tire.low.status, boolean --- TIRE_WE_ERROR - tire.we.error.status, boolean --- TIRE_TEMP_ERROR - tire.temperature.error.status, boolean --- TIRE_XOPR - tire.extreme.overpressure.status, boolean --- TIRE_OPR - tire.overpressure.status, boolean --- TIRE_UPR - tire.underpressure.status, boolean --- TIRE_XUPR - tire.extreme.underpressure.status, boolean --- TIRE_CAF - tire.cross.axle.fault.status, boolean --- TIRE_P_ERROR - tire.pressure.errur.status, boolean 122 TPMS Fault Tires: -- AXEL TIRE - fault.tire -- PSI - fault.tire.pressure.psi, psi -- TEMPERATURE - fault.tire.temperature, celsius -- AIR LEAKAGE RATE - fault.tire.leakage.psi, psi -- FAULT: --- TIRE_LEAK - fault.tire.leak.status, boolean --- TIRE_STAT_ERROR - fault.tire.error.status, boolean --- TIRE_LOW_BATTERY - fault.tire.low.status, boolean --- TIRE_WE_ERROR - fault.tire.we.error.status, boolean --- TIRE_TEMP_ERROR - fault.tire.temperature.error.status, boolean --- TIRE_XOPR - fault.tire.extreme.overpressure.status, boolean --- TIRE_OPR - fault.tire.overpressure.status, boolean --- TIRE_UPR - fault.tire.underpressure.status, boolean --- TIRE_XUPR - fault.tire.extreme.underpressure.status, boolean --- TIRE_CAF - fault.tire.cross.axle.fault.status, boolean --- TIRE_P_ERROR - fault.tire.pressure.errur.status, boolean 123 ECU_PTO_STATE - can.pto.status, boolean

Geometris protocol is updated: fixed parsing error for the packets without trailing NULL -character wait_ack parameter is added for custom command, that allows to specify if the command reply from the device is expected, so that server would wait for it

Geometris protocol is updated: added parsing of optional diagnostic information . The following flespi parameters are registered: Supervisor version - supervisor.version Hardware Options - hardware.options Bluetooth Mode - bluetooth.mode Bluetooth version - bluetooth.version Firmware Hash - firmware.hash Board type - board.type Firmware Type - firmware.type Firmware version - firmware.version SIM Type - gsm.sim.type ICCID - gsm.sim.iccid IMEI - device.imei MSISDN - gsm.msisdn

[Changelog] geometris protocol

namo

This is a changelog topic for geometris protocol.

The list of supported devices:

namo

Below is the list of currently supported Packet Items of Geometris protocol, and their mapping to flespi parameters:

1 ICCID - gsm.sim.iccid
2 EVENT UTC TIME - event.timestamp, s
3 LATITUDE DEGREES - position.latitude, degrees
4 LONGITUDE DEGREES - position.longitude, degrees
7 UNIQUE ID (sequence number) - event.seqnum
8 LOCATION AGE - position.fix.age, s (converted to seconds)
9 REASON TEXT - report.code
10 REASON CODE - report.reason
11 IGNITION - engine.ignition.status
13 SPEED KMH - position.speed, km/h
14 SPEED MPH - position.speed, km/h
15 SPEED MPS - position.speed, km/h
16 HEADING ALPHA (N,S,E,W translation of heading) - rhumb
17 HEADING DEGREES - position.direction, degrees
21 TRUE_ODOMETER_KM - vehicle.mileage, km
22 TRUE_ODOMETER_MILES - vehicle.mileage, km
23 ODOMETER KM - gnss.vehicle.mileage, km
24 ODOMETER MILES - gnss.vehicle.mileage, km
28 SERIAL NUMBER - ident
36 EVENT_UNIX_TIME - timestamp, s
40 IOSTATES - din
46 LOC_HDOP - position.hdop
50 SATELLITES - position.satellites
51 IGNITION DURATION - engine.motorhours, h
53 BATTERY VOLTAGE - external.powersource.voltage, volts
54 INTERNAL BATTERY VOLTAGE - battery.voltage, volts
55 TOTAL_IDLE_DUR - total.idle.seconds, s
56 FENCE ID - geofence.id
57 ALTITUDE - position.altitude, m
59 TEMPERATURE - device.temperature, celsius
61 ODOMETER CHANGE (KM) - segment.vehicle.mileage, km
62 ODOMETER CHANGE (MILES) - segment.vehicle.mileage, km
63 CELL INFORMATION MCC:MNC:CI:LAC - gsm.mcc, gsm.mnc, gsm.cellid, gsm.lac
68 CELL RSSI - gsm.signal.dbm, dBm
70 ENGINE RPM - can.engine.rpm, rpm
71 ENGINE COOLANT TEMPERATURE - can.engine.coolant.temperature, celsius
72 ENGINE SPEED - can.vehicle.speed, km
73 ENGINE ODOMETER - can.vehicle.mileage, km
74 VEHICLE IDENTIFICATION NUMBER - vehicle.vin
75 FUEL LEVEL - can.fuel.level, percentage
76 ECU_ACTIVE_DTC - can.active.dtc.mil.status, boolean, can.active.dtc.number, can.active.dtc.1, can.active.dtc.2 etc
77 THROTTLE POSITION N- can.throttle.position, percentage
78 BATTERY VOLTAGE - can.battery.voltage, volts
79 AMBIENT TEMPERATURE - can.ambient.air.temperature,celsius
80 CUMULATIVE FUEL ECONOMY - can.cumulative.fuel.economy, km/liters
81 TRIP FUEL ECONOMY - can.trip.fuel.economy, km/liters
82 CURRENT FUEL ECONOMY - can.fuel.economy, km/liters
89 ECU_ALL_DTC - can.mil.status, boolean, can.dtc.number, can.dtc.1, can.dtc.2 etc

namo

Geometris protocol updated, the following packet items supported:

91 J1939 Engine Hours - can.engine.motorhours, hours
92 J1939 Total fuel used - can.fuel.consumed, liters
93 J1939 Total gas used - can.gas.consumed, kg
94 J1939 Idle hours (Total) - can.total.engine.idle.time, hours
95 Total PTO hours - can.powesource.takeof.duration, hours
96 Max Vehicle speed limit - ecu.speed.limit, km/h
97 J1939 Oil Temperature - can.engine.oil.temperature, celsius
98 J1939 Engine oil level - can.engine.oil.level, percentage
99 J1939 Coolant level - can.engine.coolant.level, percentage
100 J1939 Diesel exhaust fluid level - can.adblue.level, percentage
101 J1939 Diesel exhaust fluid temperature - can.adblue.temperature, celsius
102 DPF_SOOT_LOAD - can.dpf.soot.load, percentage
103 DPF_TIME_SINCE_LAST_ACTIVE_REGENERATION - can.dpf.regeneration.time, seconds
104 DPF_SOOT_LOAD_REGENERATION_THRESHOLD - _can.dpf.regeneration.threshold, percentage__
107 TRANSMISSION_OIL_LEVEL - can.transmission.oil.level, percentage
108 TRANSMISSION_OIL_TEMPERATURE - can.transmission.oil.temerature, celsius
109 TRANSMISSION_CURRENT_GEAR - can.gear
110 SEATBELT_SWITCH - can.seatbelt.status, boolean
111 ECU_ODOMETER_KM - can.vehicle.mileage, km
112 ECU_SPEED_KM - can.vehicle.speed, km/h
113 J1939_CRUISE_CONTROL_STATE_TIME - can.total.cruise.control.time, hours
114 J1939_CRUISE_CONTROL_STATE - can.cruise.control.state
115 DM1 - can.dm1.mil.status, can.dm1.dtc.number, can.dm1.dtc.1, can.dm1.dtc.2 etc according to the number of DTC codes recevied
116 DM2 - can.dm2.mil.status, can.dm2.dtc.number, can.dm2.dtc.1, can.dm2.dtc.2 etc according to the number of DTC codes recevied
118 ECU_IDLE_FUEL_USED - can.fuel.idle.consumed, liters
119 ECU_TRIP_FUEL_USED - can.trip.fuel.consumed, liters
120 J1939_TRIP_GAS_USED - can.trip.gas.consumed, kg
121 TPMS_ All Tires:
-- AXEL TIRE - tire
-- PSI - tire.pressure.psi, psi
-- TEMPERATURE - tire.temperature, celsius
-- AIR LEAKAGE RATE - tire.leakage.psi, psi
-- FAULT:
--- TIRE_LEAK - tire.leak.status, boolean
--- TIRE_STAT_ERROR - tire.error.status, boolean
--- TIRE_LOW_BATTERY - tire.low.status, boolean
--- TIRE_WE_ERROR - tire.we.error.status, boolean
--- TIRE_TEMP_ERROR - tire.temperature.error.status, boolean
--- TIRE_XOPR - tire.extreme.overpressure.status, boolean
--- TIRE_OPR - tire.overpressure.status, boolean
--- TIRE_UPR - tire.underpressure.status, boolean
--- TIRE_XUPR - tire.extreme.underpressure.status, boolean
--- TIRE_CAF - tire.cross.axle.fault.status, boolean
--- TIRE_P_ERROR - tire.pressure.errur.status, boolean
122 TPMS Fault Tires:
-- AXEL TIRE - fault.tire
-- PSI - fault.tire.pressure.psi, psi
-- TEMPERATURE - fault.tire.temperature, celsius
-- AIR LEAKAGE RATE - fault.tire.leakage.psi, psi
-- FAULT:
--- TIRE_LEAK - fault.tire.leak.status, boolean
--- TIRE_STAT_ERROR - fault.tire.error.status, boolean
--- TIRE_LOW_BATTERY - fault.tire.low.status, boolean
--- TIRE_WE_ERROR - fault.tire.we.error.status, boolean
--- TIRE_TEMP_ERROR - fault.tire.temperature.error.status, boolean
--- TIRE_XOPR - fault.tire.extreme.overpressure.status, boolean
--- TIRE_OPR - fault.tire.overpressure.status, boolean
--- TIRE_UPR - fault.tire.underpressure.status, boolean
--- TIRE_XUPR - fault.tire.extreme.underpressure.status, boolean
--- TIRE_CAF - fault.tire.cross.axle.fault.status, boolean
--- TIRE_P_ERROR - fault.tire.pressure.errur.status, boolean
123 ECU_PTO_STATE - can.pto.status, boolean

namo

Geometris protocol is updated: fixed parsing of item 73 ENGINE ODOMETER Miles (flespi parameter can.vehicle.mileage) in order to successfully receive values expressed in floating point format.

namo

Geometris protocol is updated:

fixed parsing error for the packets without trailing NULL-character
wait_ack parameter is added for custom command, that allows to specify if the command reply from the device is expected, so that server would wait for it

namo

Geometris protocol is updated: added parsing of optional diagnostic information.
The following flespi parameters are registered:

Supervisor version - supervisor.version
Hardware Options - hardware.options
Bluetooth Mode - bluetooth.mode
Bluetooth version - bluetooth.version
Firmware Hash - firmware.hash
Board type - board.type
Firmware Type - firmware.type
Firmware version - firmware.version
SIM Type - gsm.sim.type
ICCID - gsm.sim.iccid
IMEI - device.imei
MSISDN - gsm.msisdn

YuryAheichyk

Geometris protocol is updated: added parsing of optional BLE Driver Id.
Information about detected BLE tags is registered in the ble.beacons parameter.

YuryAheichyk

The protocol will be affected by the change in parameter can.dtc to be installed in 2 weeks - Mar 15th, 2024: the parameter can.dtc is currently of string type and will be converted to type array with separate DTC codes.

Added parameter can.dtc.array as an example of future implementation of can.dtc

YuryAheichyk

YuryAheichyk changes have been applied, the can.dtc parameter type changed to array

baja

parameter renaming announcement which will happen in a week (May 22):
parameter total.idle.seconds will be renamed to total.idle.time

namo

Geometris protocol is updated: packet item 43 Bluetooth connected state is supported.

namo

Geometris protocol is updated: fixed parsing of the cases, when the last packet item is empty.

baja

Item 37 (Instantaneous X/Y/Z accelerometer data) is parsed to parameters x.acceleration, y.acceleration, z.acceleration