flespi telematics hub supports OMNI protocol. The list of supported devices OMNI YXZ-855P Segway Ninebot PJ22IOT OMNI OGB1 OMNI OT303BL OMNI OGB1 E-bike Segway Ninebot ZK601LE OMNI M136 IoT Box OMNI OC33 OMNI NAVEE V1 Pro OMNI Smart Parking Lock

R0 action setting slightly modified: the minimum value for key_time property is limited to have at least 1. If you send the R0 lock/unlock action key_time=0 the L0/L1 command will have no time to be executed. Device type OT303BL added

new device type integrated - Omni OGB1 E-bike version It has different settings set and another telemetry protocol version

New fields parsed trip.mileage through "S6" command as per documentation update.

Omni protocol is updated: added parsing of optional field Single riding mileage of S6 Obtain scooter information report. If present, the field is parsed into parameter trip.mileage (converted to km ). The update is applicable for OMNI YXZ-855P , Segway Ninebot PJ22IOT , OMNI OT303BL and Segway Ninebot ZK601LE devices.

Added new device type Segway Ninebot ZK601LE

Omni protocol is updated: W1 Alarm Cleared Report is supported. Alarm type numeric value is registered into event.enum flespi parameter. Additionally for ZK601LE device the following parameters are registered: for alarm type 2 Falling ground alarm - fall.alarm.status=false for alarm type 4 Left turn lamp off - left.turm.lamp.status=false for alarm type 5 Right turn lamp off - right.turm.lamp.status=false W0 Alarm Report is refactored. Alarm type numeric value is registered into event.enum flespi parameter. Additionally for ZK601LE device the following parameters are registered: for alarm type 1 Illegal moving alarm - illegal.movement.alarm=true for alarm type 2 Falling ground alarm - fall.alarm.status=true for alarm type 3 Illegal dismantling alarm - disassemble.alarm=true for alarm type 4 Left turn lamp on - left.turm.lamp.status=true for alarm type 5 Right turn lamp on - right.turm.lamp.status=true And for the other Omni devices the following parameters are registered: for alarm type 1 Illegal movement alarm - illegal.movement.alarm=true for alarm type 2 Falling alarm - fall.alarm.status=true for alarm type 3 Illegal removed alarm - disassemble.alarm.status=true for alarm type 4 Low power alarm - battery.low.alarm=true for alarm type 6 Lifted up alarm - fall.alarm.status=false for alarm type 7 Illegal demolition alarm (connection restoration) - disassemble.alarm.status=false Parameter event.code that was previously registered for W0 report is deprecated and will be removed in a week 19-Aug-2022. Reports E0 Upload Error Code of Controller and E1 Upload Cancelled Error Code of Controller are refactored. Now error code value is registered as string parameter ecu.error.code . Previously registered parameter error.type is deprecated and will be removed in a week 19-Aug-2022.

Omni protocol is updated: old parameters event.code and error.type are removed after renaming namo .

S4 setting added for horseshoe like devices

Omni protocol has been updated, added C0 RFID unlock request command report parsing

New device type added: OMNI M136 IoT Box

[Changelog] omni protocol

bird

New setting added for ot303bl, m136, yxz_855p: V1 Beep playback setting, Actions tab — configure alarm, unlock, and lock beep sounds (Invalid/Off/On).

bird

L5 (Unlock external devices) setting is now available for OT303BL
Hub lock operations (unlock/lock/status) added to L5 setting for OT303BL, YXZ-855P, and M136

namo

Omni protocol is updated: C1 Manage RFID card setting (Configuration tab) is added for OMNI OGB1 device type:

bird

Fixed position.speed parsing for M136 devices in S6 packets — speed values are now correctly divided by 10

bird

Fixed position.speed parsing for M136 devices in S6 packets — speed division by 10 now applies only to ZX and EA vendor codes (confirmed 0.1 km/h units). DE vendor code devices now correctly report speed in km/h without scaling

bird

Fixed parsing of D0/D1/D3 location reports when the GPS fix is invalid - indication.mode now reports the correct positioning mode (A/D/E/N) instead of the altitude unit.

bird

New setting for OMNI M136: Device Information (Info tab) exposing Software Version and Build Date, read from the device with the G0 instruction and refreshed per the channel settings_polling schedule.

bird

New settings fields for m136: controller_version (scooter controller software version), bms_version (BMS version) and voice_version (voice file version), read from the G0 response into the Device Information setting.

namo

Omni protocol is updated: changed processing of U2 Firmware upgrade result packet:

firmware_upgrade command is finished only if FW Upgrade Device Type of the command matches that in the U2 report
channel message of type U2 is stored

bird

New field Bluetooth Version (bluetooth_version) added to the Device Information setting for M136 devices.

bird

Fixed L0/L1 lock result parsing for m136, yxz_855p, ot303bl, navee_v1_pro, generic, ogb1, ogb1_ebike, oc33 and smart_parking_lock: the echoed operation timestamp is now stored in unlock.timestamp and no longer replaces the message timestamp.

trip.duration in L1 lock results switches from minutes to seconds on 2026-10-26. Until then, read the new temporary parameter trip.duration.seconds (same value in seconds); it will be removed on 2026-11-02.