flespi telematics hub supports OMNI protocol. The list of supported devices OMNI YXZ-855P Segway Ninebot PJ22IOT OMNI OGB1 OMNI OT303BL OMNI OGB1 E-bike Segway Ninebot ZK601LE OMNI M136 IoT Box OMNI OC33

R0 action setting slightly modified: the minimum value for key_time property is limited to have at least 1. If you send the R0 lock/unlock action key_time=0 the L0/L1 command will have no time to be executed. Device type OT303BL added

new device type integrated - Omni OGB1 E-bike version It has different settings set and another telemetry protocol version

New fields parsed trip.mileage through "S6" command as per documentation update.

Omni protocol is updated: added parsing of optional field Single riding mileage of S6 Obtain scooter information report. If present, the field is parsed into parameter trip.mileage (converted to km ). The update is applicable for OMNI YXZ-855P , Segway Ninebot PJ22IOT , OMNI OT303BL and Segway Ninebot ZK601LE devices.

Added new device type Segway Ninebot ZK601LE

Omni protocol is updated: W1 Alarm Cleared Report is supported. Alarm type numeric value is registered into event.enum flespi parameter. Additionally for ZK601LE device the following parameters are registered: for alarm type 2 Falling ground alarm - fall.alarm.status=false for alarm type 4 Left turn lamp off - left.turm.lamp.status=false for alarm type 5 Right turn lamp off - right.turm.lamp.status=false W0 Alarm Report is refactored. Alarm type numeric value is registered into event.enum flespi parameter. Additionally for ZK601LE device the following parameters are registered: for alarm type 1 Illegal moving alarm - illegal.movement.alarm=true for alarm type 2 Falling ground alarm - fall.alarm.status=true for alarm type 3 Illegal dismantling alarm - disassemble.alarm=true for alarm type 4 Left turn lamp on - left.turm.lamp.status=true for alarm type 5 Right turn lamp on - right.turm.lamp.status=true And for the other Omni devices the following parameters are registered: for alarm type 1 Illegal movement alarm - illegal.movement.alarm=true for alarm type 2 Falling alarm - fall.alarm.status=true for alarm type 3 Illegal removed alarm - disassemble.alarm.status=true for alarm type 4 Low power alarm - battery.low.alarm=true for alarm type 6 Lifted up alarm - fall.alarm.status=false for alarm type 7 Illegal demolition alarm (connection restoration) - disassemble.alarm.status=false Parameter event.code that was previously registered for W0 report is deprecated and will be removed in a week 19-Aug-2022. Reports E0 Upload Error Code of Controller and E1 Upload Cancelled Error Code of Controller are refactored. Now error code value is registered as string parameter ecu.error.code . Previously registered parameter error.type is deprecated and will be removed in a week 19-Aug-2022.

[Changelog] omni protocol

namo

Omni protocol is updated:

W1 Alarm Cleared Report is supported. Alarm type numeric value is registered into event.enum flespi parameter. Additionally for ZK601LE device the following parameters are registered:
- for alarm type 2 Falling ground alarm - fall.alarm.status=false
- for alarm type 4 Left turn lamp off - left.turm.lamp.status=false
- for alarm type 5 Right turn lamp off - right.turm.lamp.status=false
W0 Alarm Report is refactored. Alarm type numeric value is registered into event.enum flespi parameter. Additionally for ZK601LE device the following parameters are registered:
- for alarm type 1 Illegal moving alarm - illegal.movement.alarm=true
- for alarm type 2 Falling ground alarm - fall.alarm.status=true
- for alarm type 3 Illegal dismantling alarm - disassemble.alarm=true
- for alarm type 4 Left turn lamp on - left.turm.lamp.status=true
- for alarm type 5 Right turn lamp on - right.turm.lamp.status=true
  And for the other Omni devices the following parameters are registered:
- for alarm type 1 Illegal movement alarm - illegal.movement.alarm=true
- for alarm type 2 Falling alarm - fall.alarm.status=true
- for alarm type 3 Illegal removed alarm - disassemble.alarm.status=true
- for alarm type 4 Low power alarm - battery.low.alarm=true
- for alarm type 6 Lifted up alarm - fall.alarm.status=false
- for alarm type 7 Illegal demolition alarm (connection restoration) - disassemble.alarm.status=false

Parameter event.code that was previously registered for W0 report is deprecated and will be removed in a week 19-Aug-2022.

Reports E0 Upload Error Code of Controller and E1 Upload Cancelled Error Code of Controller are refactored. Now error code value is registered as string parameter ecu.error.code. Previously registered parameter error.type is deprecated and will be removed in a week 19-Aug-2022.

namo

Omni protocol is updated: old parameters event.code and error.type are removed after renaming namo .

baja

S4 setting added for horseshoe like devices

YuryAheichyk

Omni protocol has been updated, added C0 RFID unlock request command report parsing

baja

New device type added: OMNI M136 IoT Box

namo

New setting L5 Unlock external devices (Actions tab) in added for OMNI YXZ-855P

YuryAheichyk

New device added OMNI OC33

YuryAheichyk

Added action and configuration settings for OC33

baja

string parameter "vehicle.state" with values 1, 2 or 3, renamed to numeric parameter "speed.mode"
Both parameters are registered now, in 1 week (November 12) vehicle.state will be removed

baja

baja vehicle.state parameter removed

YuryAheichyk

Fixed S6 Obtain scooter information report parsing from OMNI M136 IoT Box

YuryAheichyk

Added D2(Get WiFi assisted positioning) command response parsing