[Changelog] eview protocol

baja

The Personal Info setting for EV-06 devices is now available in the flespi panel under Configuration tab. You can configure name, sex, birthdate, blood type, height, weight, and profile URLs directly through the UI instead of using custom binary commands.

baja

New device type added: Eview EV-12

YuryAheichyk

Improved Scan BLE setting: latitude and longitude are now optional — if not provided, device's last known GPS position from telemetry is used as fallback.

bird

New data command keys supported for EV-12:

0x67 Sub1G 3rd Device Status — parameters: rf.device.serial.number, rf.device.signal.rssi, button.pressed.status, fall.alarm.status, battery.low.status
0x32 BLE MAC List — parameters: ble.mac.address, bluetooth.signal.strength
0x33/0x34 iBeacon Beacon List — ble.beacons array (id, major, minor, rssi, company.id, rssi.1m)
0x35 Eddystone-UID Beacon List — ble.beacons array (id, rssi, uuid, tx.power)
0x60 BLE Heart Rate Service — parameters: heart.rate, heart.rate.trust.level, ble.sensor.battery.level
0x61 BLE Health Thermometer Service — parameter: body.temperature (IEEE-11073 float)
0x62 BLE Peripheral Connect State — parameters: bluetooth.peripheral.state, bluetooth.device.mac.address, ble.sensor.battery.level
0x64 Health Data extended with Infrared Thermometer (type 3) — body.temperature, and Weight Scale (type 4) — body.weight

bird

New setting added for EV-12: Continue Locating, Actions tab

bird

Fixed gsm.signal.dbm parameter: now stores actual dBm values (converted from raw signal strength index using standard AT+CSQ formula) instead of raw 0-31 index.

bird

New setting added for EV-04, EV-05, EV-06, EV-07B, EV-09, EV-202 and EV-12 devices: Extra Enable Control, System params tab — 30 boolean feature toggles including VoLTE disable, BLE controls, home alerts, power saving, beacon modes, and more.

bird

New setting added for all supported devices: Welfare Check, Alarm tab
New setting added for EV-04: Welfare Check Control, Actions tab

bird

New wifi.signal.strength and wifi.mac.address parameters added for WiFi Towers (key 0x22) in Services Command context for all eview device types.

bird

APN setting added - access point name, username and password are now readable from and writable to the device configuration. Available for EV-04, EV-05, EV-06, EV-07B, EV-09, EV-12, EV-201, EV-201M, EV-206M and EV-202.
SpO2 Detect Interval setting added for EV-06 - enable flag and detection interval (60-86400 seconds).

bird

event.enum and timestamp.key are now registered for messages received via the services command (0x03), matching what the data command (0x01) has always produced. Affects heartbeat-with-status, cell tower and Wi-Fi tower messages on all device types.

New setting Continue Locating for Eview EV-06 and Eview EV-07B, Actions tab.

bird

TLS transport is now supported for eview channels. Enable it in the channel configuration to encrypt device traffic.

bird

Fixed Working Mode interval validation for Eview EV-04, EV-05, EV-06, EV-07B, EV-09, EV-12, EV-202, EV-201G, EV-201M and EV-206M: modes 4/5 require 600–604800 seconds; modes 1/2/3/6 accept zero for the unused interval.

bird

Fixed Motion Alert and Tilt Alert setting writes for Eview EV-04, EV-05, EV-06, EV-07B, EV-09, EV-12, EV-201, EV-201G, EV-201M, EV-202 and EV-206M.
Corrected Motion Alert moving-period range to 1–60 seconds and Tilt Alert time-threshold range to 10–180 seconds for EV-04, EV-05, EV-06, EV-07B, EV-09, EV-12 and EV-202.

bird

New parameters beacon.leave.home.alarm and beacon.come.home.alarm (alarm "Leave home" / "At home") for EV-04, EV-05, EV-06, EV-07B, EV-07S, EV-08, EV-09, EV-12 and EV-202.
beacon.absence.status renamed to beacon.leave.home.alarm. Both parameters are registered now; beacon.absence.status will be removed on 2026-10-13.
Bugfix: geofence.status.1-4 is now registered only together with the matching geofence.alarm.N. Previously it was incorrectly registered as false in every alarm message, and the 3/4 indexes were swapped.
EV-201M, EV-206M and EV-201G alarm codes are now parsed per the pet tracker manual: ble.disconnected.alarm added, and shutdown.alarm / startup.alarm renamed to power.off.alarm / power.on.alarm. Both names are registered now; the old ones will be removed on 2026-10-13.

bird

beacon.absence.status parameter removed (replaced by beacon.leave.home.alarm). shutdown.alarm and startup.alarm removed for EV-201M, EV-206M and EV-201G (replaced by power.off.alarm and power.on.alarm).

« Previous Page