YuryAheichyk Added SMS password configuration field for Eview devices The SMS password will be added to the SMS command text during execution
namo Eview protocol updated: timestamp for key 0x23 (BLE Location) is taken now from key 0x24 (General data), if possible. The update is applicable for EV-07B devices.
namo Eview protocol updated: for Eview EV-07B devices parameter timestamp.key is added for all messages that are registered from 0x01 Data Command Key's. timestamp.key is a synthetic parameter that is calculated based on the timestamp reported by device, packet sequence number and sequential number of the Key information in the 0x01 Data Command packet, that prevents merging of different messages with the same timestamp in the device's storage. Read more about this parameter here.
baja added support for Health Data 3rd Device messages (packet 0x64) with heart.rate, spo2.rate, perfusion.index, blood.pressure.systolic, and blood.pressure.diastolic parameters
namo Eview protocol is updated: Firmware upgrade action setting is remastered to be a command. The firmware_upgrade command is available for EV-07B, EV-201M, EV-206M device types.
namo Eview protocol is updated: the following setting are added for EV-06 device type: Voice Prompt (System Params tab) New Find Me (Actions tab)
baja The Personal Info setting for EV-06 devices is now available in the flespi panel under Configuration tab. You can configure name, sex, birthdate, blood type, height, weight, and profile URLs directly through the UI instead of using custom binary commands.
YuryAheichyk Improved Scan BLE setting: latitude and longitude are now optional — if not provided, device's last known GPS position from telemetry is used as fallback.
bird New data command keys supported for EV-12: 0x67 Sub1G 3rd Device Status — parameters: rf.device.serial.number, rf.device.signal.rssi, button.pressed.status, fall.alarm.status, battery.low.status 0x32 BLE MAC List — parameters: ble.mac.address, bluetooth.signal.strength 0x33/0x34 iBeacon Beacon List — ble.beacons array (id, major, minor, rssi, company.id, rssi.1m) 0x35 Eddystone-UID Beacon List — ble.beacons array (id, rssi, uuid, tx.power) 0x60 BLE Heart Rate Service — parameters: heart.rate, heart.rate.trust.level, ble.sensor.battery.level 0x61 BLE Health Thermometer Service — parameter: body.temperature (IEEE-11073 float) 0x62 BLE Peripheral Connect State — parameters: bluetooth.peripheral.state, bluetooth.device.mac.address, ble.sensor.battery.level 0x64 Health Data extended with Infrared Thermometer (type 3) — body.temperature, and Weight Scale (type 4) — body.weight
bird Fixed gsm.signal.dbm parameter: now stores actual dBm values (converted from raw signal strength index using standard AT+CSQ formula) instead of raw 0-31 index.
bird New setting added for EV-04, EV-05, EV-06, EV-07B, EV-09, EV-202 and EV-12 devices: Extra Enable Control, System params tab — 30 boolean feature toggles including VoLTE disable, BLE controls, home alerts, power saving, beacon modes, and more.
bird New setting added for all supported devices: Welfare Check, Alarm tab New setting added for EV-04: Welfare Check Control, Actions tab
bird New wifi.signal.strength and wifi.mac.address parameters added for WiFi Towers (key 0x22) in Services Command context for all eview device types.
bird APN setting added - access point name, username and password are now readable from and writable to the device configuration. Available for EV-04, EV-05, EV-06, EV-07B, EV-09, EV-12, EV-201, EV-201M, EV-206M and EV-202. SpO2 Detect Interval setting added for EV-06 - enable flag and detection interval (60-86400 seconds).
