Queclink protocol is one of the most deeply integrated protocols in flespi telematics hub. Here is a guide how to obtain telematics data from Queclink devices over API . The following devices are supported Queclink GB100 Queclink GB100MG Queclink GB130MG Queclink TMR100MG Queclink GV50 Queclink GV50M Queclink GV53MG Queclink GV55 Queclink GV55N Queclink GV55 Lite Queclink GV55S Queclink GV55W Queclink GV56 Queclink GV57 Queclink GV65 Queclink GV65 Plus Queclink GV75MG Queclink GV200 Queclink GV300 Queclink GV300CAN Queclink GV300N Queclink GV300L Queclink GV300W Queclink GV320 Queclink GV350CEU Queclink GV350M Queclink GV500 Queclink GV500MA Queclink GV500MAP Queclink GV500N Queclink GV500VC Queclink GV600 Queclink GV600M Queclink GV600MG Queclink GV620MG Queclink GV75 Queclink GV75W Queclink GV800 Queclink GMT100 Queclink GMT100N Queclink GMT200 Queclink GL50B Queclink GL50MG Queclink GL53MG Queclink GL100 Queclink GL100M Queclink GL200 Queclink GL300 Queclink GL300A Queclink GL300M Queclink GL300N Queclink GL300L Queclink GL300W Queclink GL300VC Queclink GL310M Queclink GL320M Queclink GL500 Queclink GL500M Queclink GL500N Queclink GL501M Queclink GL502MG Queclink GL505 Queclink GL520(M) Queclink GL521M Queclink GL530(M) Queclink GL530MG Queclink GT300 Queclink GS100 Queclink GT301 Queclink CV100LG Queclink GV58CEU Queclink GV355CEU Queclink GV310LAU Queclink GV58LAU Queclink CV200 Queclink GV305CEU Queclink GV57CEU Queclink GV57MGP Queclink GL53MGP Queclink GV500CG Queclink GV50CG Queclink GB100CG Queclink SC350M Queclink T-Panel(ZK601) Queclink GV50CNA Queclink GL601CEU Queclink GV500CNA Queclink GV501LG Queclink GL533CG Queclink GL601MG Queclink GV50CEU Queclink GV58CG Queclink GL50B Lite Queclink GL33CG Queclink GV75CG Queclink GL320MG

GTMAI report is supported. This report is sent to backend server when analog input voltage enters predefined alarm range. To configure alarm parameters of analog input ports use AT+GTMAI command. Applicable for Queclink GV200 device.

GTLOC packet is supported. This packet contains device real time position and is sent to the server after long press of a Function Key button. Function Key should be previously configured to work in Location mode by AT+GTFKS command. Applicable for Queclink GL300M device.

New device supported: Queclink GV50M

GTDRM packet is supported: device removal alarm. To enable this alarm use command AT+GTCFG with bit 17 of Event mask activated. Applicable for Queclink GV50 device.

GTIFG report parsing fixed for Queclink GMT200 devices.

GTLBS packet is supported for Queclink protocol.

New device supported: Queclink GL50B Parsing of GTSTR and GTCTN packets is fixed for this device type.

GTAIF report parsing fixed for Queclink GL300M devices.

GTBPL report parsing fixed for Queclink GL520 and GL530 devices.

Queclink protocol updated: Device type GL100 is renamed to GL100M (changes was automatically applied to all existing GL100 devices) GL100 legacy device type is added for queclink protocol (this device has different messages format - messages end with '\0' character)

[Changelog] queclink protocol

EvgenyShatilo

Tacho functionality update: Fixed file name formatting.

Changed parsing of driver's surname depending on region: "A", "AND", "B", "CH", "D", "DK", "E", "F", "FL", "UK", "I", "IRL", "L", "N", "NL", "P", "RSM", "S", "V". Symbol mismatch corrected.
Fixed name format for France. Now file name parameters are separated by underscore "_" to improve readability and the ability to automatically parse the file name, because parameters can have floating value sizes. For example, state number does not contain a fixed number of characters, etc.
Before:
VU file: FXX-NNN-ZZ2508011746.V1B Driver file: FXX-NNN-ZZ2508011746.C1B
After:
VU file: F_XX-NNN-ZZ_2508011746.V1B Driver file: F_XX-NNN-ZZ_2508011746.C1B

namo

Queclink protocol updated: added configuration setting Fixed Report (Tracking tab) for device type Queclink GL320M.
The settings allows to configure the frequency and conditions of sending GTFRI reports to the server.

namo

Queclink protocol is updated.

Reboot, Reset, Power Off, Request Position settings (Actions tab) are added for GV350m device type
Safe Flight Manager setting (Tracking tab) as well as parsing of GTROF and GTRON reports is implemented for GL320M device type

YuryAheichyk

Fixed GTERI report parsing from GL320M, GL320MG devices

EvgenyShatilo

Tacho functionality udpate. Fixed encoding parsing error, more details here.

namo

Queclink protocol is updated: <RAT and Band Data> field of GTERI report is supported for Queclink GV620MG.

namo

Queclink protocol is updated: fixed processing of GTSRI (Backend Server Registration Information) configuration for GV57MGP device type.

YuryAheichyk

Updated GTBTI report parsing from GB100CG according to the 5.01 protocol version

EvgenyShatilo

Tacho functionality update: fixed an error that occurred when attempting to authenticate the tracker with the tachograph when the tracker decided to do so automatically. This occurs when the download process was not initiated by the user.
This sometimes occurs when reconfiguring the tracker; apparently, it affects various tracker systems.

YuryAheichyk

Queclink protocol updated:

Added CSQ parameters parsing from GTFRI, GTERI packets of GV53MG, GV500MA devices
Fixed engine.ignition.status parameter parsing from GV620MG
Fixed GTTPM report parsing from GB130MG
Fixed Bluetooth accessory data parsing from GV620MG

YuryAheichyk

Added GTBTD report parsing from GV350CEU devices