Queclink protocol is one of the most deeply integrated protocols in flespi telematics hub. Here is a guide how to obtain telematics data from Queclink devices over API . The following devices are supported Queclink GB100 Queclink GB100MG Queclink GB130MG Queclink TMR100MG Queclink GV50 Queclink GV50M Queclink GV53MG Queclink GV55 Queclink GV55N Queclink GV55 Lite Queclink GV55S Queclink GV55W Queclink GV56 Queclink GV57 Queclink GV65 Queclink GV75MG Queclink GV200 Queclink GV300 Queclink GV300CAN Queclink GV300N Queclink GV300L Queclink GV300W Queclink GV320 Queclink GV350CEU Queclink GV350M Queclink GV500 Queclink GV500MA Queclink GV500MAP Queclink GV500N Queclink GV500VC Queclink GV600 Queclink GV600M Queclink GV600MG Queclink GV620MG Queclink GV75 Queclink GV75W Queclink GV800 Queclink GMT100 Queclink GMT100N Queclink GMT200 Queclink GL50B Queclink GL50MG Queclink GL53MG Queclink GL100 Queclink GL100M Queclink GL200 Queclink GL300 Queclink GL300A Queclink GL300M Queclink GL300N Queclink GL300L Queclink GL300W Queclink GL300VC Queclink GL310M Queclink GL320M Queclink GL500 Queclink GL500M Queclink GL500N Queclink GL501M Queclink GL502MG Queclink GL505 Queclink GL520(M) Queclink GL521M Queclink GL530(M) Queclink GL530MG Queclink GT300 Queclink GS100 Queclink GT301 Queclink CV100LG Queclink GV58CEU Queclink GV355CEU Queclink GV310LAU Queclink GV58LAU Queclink CV200 Queclink GV305CEU Queclink GV57CEU Queclink GV57MGP Queclink GL53MGP Queclink GV500CG Queclink GV50CG Queclink GB100CG Queclink SC350M Queclink T-Panel(ZK601) Queclink GV50CNA Queclink GL601CEU Queclink GV500CNA Queclink GV501LG Queclink GL533CG Queclink GL601MG Queclink GV50CEU Queclink GV58CG Queclink GL50B Lite

GTMAI report is supported. This report is sent to backend server when analog input voltage enters predefined alarm range. To configure alarm parameters of analog input ports use AT+GTMAI command. Applicable for Queclink GV200 device.

GTLOC packet is supported. This packet contains device real time position and is sent to the server after long press of a Function Key button. Function Key should be previously configured to work in Location mode by AT+GTFKS command. Applicable for Queclink GL300M device.

New device supported: Queclink GV50M

GTDRM packet is supported: device removal alarm. To enable this alarm use command AT+GTCFG with bit 17 of Event mask activated. Applicable for Queclink GV50 device.

GTIFG report parsing fixed for Queclink GMT200 devices.

GTLBS packet is supported for Queclink protocol.

New device supported: Queclink GL50B Parsing of GTSTR and GTCTN packets is fixed for this device type.

GTAIF report parsing fixed for Queclink GL300M devices.

GTBPL report parsing fixed for Queclink GL520 and GL530 devices.

Queclink protocol updated: Device type GL100 is renamed to GL100M (changes was automatically applied to all existing GL100 devices) GL100 legacy device type is added for queclink protocol (this device has different messages format - messages end with '\0' character)

[Changelog] queclink protocol

YuryAheichyk

Fixed GTERI report parsing from GV350M device

YuryAheichyk

YuryAheichyk changes have been applied, the can.dtc parameter type changed to array

YuryAheichyk

Fixed GTBAS report parsing from CV200

YuryAheichyk

Fixed GTIGS report parsing from GV75M

EvgenyShatilo

GTNRI package has been supported, which is a wrapper for devices connected to the tracker. Changes have been added and tested for the model: GV57MGP.
The original data from a thrd party device that is connected to a tracker will be saved in the payload.text parameter, which can be further parsed using pvm-code-plugin.

YuryAheichyk

Fixed GTFRI report parsing from device GV56 starting from version 13.00

namo

Quelcink protocol is updated: added parsing of GTTMS and GTTPM reports (tire management system).

YuryAheichyk

Fixed GTOBD report DTC codes parsing from devices GV500, GV500N, GV500MAP

namo

Queclink protocol updated: fixed parsing of GTCAN report.
The update is applicable for devices GV300CAN, GV58CEU, GV355CEU, GV350CEU, GV58LAU, GV305CEU

YuryAheichyk

Added Time zone setting for device GV53MG

YuryAheichyk

Video live streaming from CV100 and CV200 devices is now supported. Also added standard video commands playback_video and video_timeline.

The playback_video command performs almost the same function as request_video, except its result is an HLS live stream URL, allowing you to view the historical video almost immediately, without waiting for the full file upload.

The video_timeline command enables you to retrieve time intervals with video recordings stored on the disk, which are available for download/playback.

YuryAheichyk

Fixed errors when viewing a video stream from two cameras simultaneously from CV100, CV200

YuryAheichyk

New device GV500CG has been added

YuryAheichyk

Fixed GTERI report parsing from CV200 devices

baja

parameter renaming announcement:
In a week (May 21), parameter ibutton.authorized.state from GTIDA report will be remastered: the numeric value will be stored in ibutton.authorized.state.enum parameter, while ibutton.authorized.state will have string value with explanation 0 for "unauthorized or disabled", 1 for "authorized", 2 for "logged out"

baja

parameter renaming announcement which will happen in a week (May 22):
string parameter position.fix.type.enum will be renamed to position.fix.type
string parameter report.reason.enum will be changed to report.reason, the parameter report.reason.enum will hold coresponding numeric value
parameter can.lights.hazard.lights.status will be renmaed to can.lights.hazard.lights.status
parameter can.doors.boot.status will be renamed to can.doors.hood.status

YuryAheichyk

Fixed GTRFQ, GTVDO, GTSOD, GTCAN, GTVGN, GTVGF, +ACK:GTDSS reports parsing from CV200 device

namo

Queclink protocol is updated: fixed parsing of BAS configuration for Queclink GV620MG

YuryAheichyk

Fixed GTERI report parsing for GV56, GV58CEU, GV57CEU devices

YuryAheichyk

The record index parameter is no longer registered, for CV100 and CV200 devices. You can check the availability of a video file for the desired period of time using the Video timeline command