Queclink protocol is one of the most deeply integrated protocols in flespi telematics hub. Here is a guide how to obtain telematics data from Queclink devices over API . The following devices are supported Queclink GB100 Queclink GB100MG Queclink GB130MG Queclink TMR100MG Queclink GV50 Queclink GV50M Queclink GV53MG Queclink GV55 Queclink GV55N Queclink GV55 Lite Queclink GV55S Queclink GV55W Queclink GV56 Queclink GV57 Queclink GV65 Queclink GV65 Plus Queclink GV75MG Queclink GV200 Queclink GV300 Queclink GV300CAN Queclink GV300N Queclink GV300L Queclink GV300W Queclink GV320 Queclink GV350CEU Queclink GV350M Queclink GV500 Queclink GV500MA Queclink GV500MAP Queclink GV500N Queclink GV500VC Queclink GV600 Queclink GV600M Queclink GV600MG Queclink GV620MG Queclink GV75 Queclink GV75W Queclink GV800 Queclink GMT100 Queclink GMT100N Queclink GMT200 Queclink GL50B Queclink GL50MG Queclink GL53MG Queclink GL100 Queclink GL100M Queclink GL200 Queclink GL300 Queclink GL300A Queclink GL300M Queclink GL300N Queclink GL300L Queclink GL300W Queclink GL300VC Queclink GL310M Queclink GL320M Queclink GL500 Queclink GL500M Queclink GL500N Queclink GL501M Queclink GL502MG Queclink GL505 Queclink GL520(M) Queclink GL521M Queclink GL530(M) Queclink GL530MG Queclink GT300 Queclink GS100 Queclink GT301 Queclink CV100LG Queclink GV58CEU Queclink GV355CEU Queclink GV310LAU Queclink GV58LAU Queclink CV200 Queclink GV305CEU Queclink GV57CEU Queclink GV57MGP Queclink GL53MGP Queclink GV500CG Queclink GV50CG Queclink GB100CG Queclink SC350M Queclink T-Panel(ZK601) Queclink GV50CNA Queclink GL601CEU Queclink GV500CNA Queclink GV501LG Queclink GL533CG Queclink GL601MG Queclink GV50CEU Queclink GV58CG Queclink GL50B Lite Queclink GL33CG

GTMAI report is supported. This report is sent to backend server when analog input voltage enters predefined alarm range. To configure alarm parameters of analog input ports use AT+GTMAI command. Applicable for Queclink GV200 device.

GTLOC packet is supported. This packet contains device real time position and is sent to the server after long press of a Function Key button. Function Key should be previously configured to work in Location mode by AT+GTFKS command. Applicable for Queclink GL300M device.

New device supported: Queclink GV50M

GTDRM packet is supported: device removal alarm. To enable this alarm use command AT+GTCFG with bit 17 of Event mask activated. Applicable for Queclink GV50 device.

GTIFG report parsing fixed for Queclink GMT200 devices.

GTLBS packet is supported for Queclink protocol.

New device supported: Queclink GL50B Parsing of GTSTR and GTCTN packets is fixed for this device type.

GTAIF report parsing fixed for Queclink GL300M devices.

GTBPL report parsing fixed for Queclink GL520 and GL530 devices.

Queclink protocol updated: Device type GL100 is renamed to GL100M (changes was automatically applied to all existing GL100 devices) GL100 legacy device type is added for queclink protocol (this device has different messages format - messages end with '\0' character)

[Changelog] queclink protocol

omol

Queclink protocol has been updated: added missing Output direction parameter in BSI configuration request from the following devices: GB100MG, GV50M, GV500MA, GV500MAP, GV600M.

omol

Queclink protocol has been updated: fixed GTLBS report parsing with non-empty Component Expansion Mask parameter from GL50B, GL520(M), GL530(M).

YuryAheichyk

YuryAheichyk
Queclink protocol has been updated, changes applied

YuryAheichyk

Queclink protocol has been updated, fixed GTDOS report pasing

omol

Queclink protocol has been updated: reserved parameter is taken into account in GTINF reports sent by GV75M.

YuryAheichyk

Queclink protocol will be affected by the change parameter name battery.level in report GTERI for GV310LAU, GV350CEU to be installed in 1 weeks - Oct 23th, 2023: the parameter battery.level will be stored as backup.battery.level

YuryAheichyk

YuryAheichyk changes have been applied

omol

Queclink protocol has been updated: fixed GBC configuration section parsing from GL50B.

baja

New device type support has been added: GV305CEU.

omol

Queclink protocol has been updated:

fixed GTRTL report parsing with non-empty Component Expansion Mask parameter from GL50B
fixed negative Service Distance CAN parameter parsing from GV350CEU

omol

Queclink protocol has been updated: fixed parsing negative temperature sensor values received as 1-Wire Device Data parameter in GTERI reports from GV300, GV300W, GV300L, GV300CAN, GV350M, GV600. GV600M, GV600MG, GV620MG, GV58CEU, GV355CEU, GV310LAU.

YuryAheichyk

Queclink protocol has been updated, added Time Zone setting for GV50 and fixed the same setting for GL50B

YuryAheichyk

Queclink protocol has been updated, fixed GTFSC report parsing

YuryAheichyk

Queclink protocol has been updated, fixed GTVER report parsing from GV53MG

baja

New device type added: GV57CEU.

YuryAheichyk

Queclink protocol has been changed, fixed GTVGF, GTVGN reports parsing from GV620MG devices

YuryAheichyk

Queclink protocol has been updated, fixed GTERI report parsing from GV355CEU
Added parsing of new parameters:

can.vehicle.battery.temperature
can.vehicle.battery.charge.current
can.vehicle.battery.power
can.vehicle.battery.health
can.vehicle.energy.used
can.vehicle.energy.used.idle
can.vehicle.energy.charged
tacho.driver.remaining.before.rest.duration
tacho.driver.next.rest.duration
tacho.driver.daily.before.rest.duration
tacho.driver.weekly.before.rest.duration
tacho.driver.continuous_driving.duration
tacho.driver.daily.driving.duration
tacho.driver.weekly.driving.duration
tacho.timestamp

YuryAheichyk

Queclink protocol has been updated, added OBD Mileage parameter parsing from GV500MAP

YuryAheichyk

Queclink protocol has been updated, fixed GTBID report parsing from GV58CEU according to the protocol document of 5.03 version

YuryAheichyk

Queclink protocol has been updated, added new device GV57MGP