Queclink protocol is one of the most deeply integrated protocols in flespi telematics hub. Here is a guide how to obtain telematics data from Queclink devices over API . The following devices are supported Queclink GB100 Queclink GB100MG Queclink GB130MG Queclink TMR100MG Queclink GV50 Queclink GV50M Queclink GV53MG Queclink GV55 Queclink GV55N Queclink GV55 Lite Queclink GV55S Queclink GV55W Queclink GV56 Queclink GV57 Queclink GV65 Queclink GV75MG Queclink GV200 Queclink GV300 Queclink GV300CAN Queclink GV300N Queclink GV300L Queclink GV300W Queclink GV320 Queclink GV350CEU Queclink GV350M Queclink GV500 Queclink GV500MA Queclink GV500MAP Queclink GV500N Queclink GV500VC Queclink GV600 Queclink GV600M Queclink GV600MG Queclink GV620MG Queclink GV75 Queclink GV75W Queclink GV800 Queclink GMT100 Queclink GMT100N Queclink GMT200 Queclink GL50B Queclink GL50MG Queclink GL53MG Queclink GL100 Queclink GL100M Queclink GL200 Queclink GL300 Queclink GL300A Queclink GL300M Queclink GL300N Queclink GL300L Queclink GL300W Queclink GL300VC Queclink GL310M Queclink GL320M Queclink GL500 Queclink GL500M Queclink GL500N Queclink GL501M Queclink GL502MG Queclink GL505 Queclink GL520(M) Queclink GL521M Queclink GL530(M) Queclink GL530MG Queclink GT300 Queclink GS100 Queclink GT301 Queclink CV100LG Queclink GV58CEU Queclink GV355CEU Queclink GV310LAU Queclink GV58LAU Queclink CV200 Queclink GV305CEU Queclink GV57CEU Queclink GV57MGP Queclink GL53MGP Queclink GV500CG Queclink GV50CG QUeclink GB100CG

GTMAI report is supported. This report is sent to backend server when analog input voltage enters predefined alarm range. To configure alarm parameters of analog input ports use AT+GTMAI command. Applicable for Queclink GV200 device.

GTLOC packet is supported. This packet contains device real time position and is sent to the server after long press of a Function Key button. Function Key should be previously configured to work in Location mode by AT+GTFKS command. Applicable for Queclink GL300M device.

New device supported: Queclink GV50M

GTDRM packet is supported: device removal alarm. To enable this alarm use command AT+GTCFG with bit 17 of Event mask activated. Applicable for Queclink GV50 device.

GTIFG report parsing fixed for Queclink GMT200 devices.

GTLBS packet is supported for Queclink protocol.

New device supported: Queclink GL50B Parsing of GTSTR and GTCTN packets is fixed for this device type.

GTAIF report parsing fixed for Queclink GL300M devices.

GTBPL report parsing fixed for Queclink GL520 and GL530 devices.

Queclink protocol updated: Device type GL100 is renamed to GL100M (changes was automatically applied to all existing GL100 devices) GL100 legacy device type is added for queclink protocol (this device has different messages format - messages end with '\0' character)

[Changelog] queclink protocol

YuryAheichyk

New device supported: Queclink GV355CEU

omol

Queclink protocol has been updated: fixed GTERI report parsing from GL521M.

omol

Queclink protocol has been updated:

improved GTFRI report parsing from GV50 (RSSI, BER, Satellite Number parameters are parsed now)
fixed GTINF report parsing from GV75 with old protocol version
implemented multiple positions support in GTTRI report from GL100 and GT300
fixed GTINF report parsing from GL100
fixed GTGSM report parsing from GL520(M)

omol

Queclink protocol has been updated:

fixed GTJDS report parsing from GV300W and GV55W
fixed GTLBC report parsing from GV55

omol

Queclink protocol has been updated:

fixed parsing of GTINF report with non-zero expand mask from GV300W
disabled time_zone2 setting for GV58CEU because of inconsistency in protocol documentation

omol

omol
Queclink protocol has been updated: time_zone2 setting for GV58CEU is enabled and adjusted to the latest documentation version.

omol

Queclink protocol has been updated: fixed GTGSV parsing from GL300, GL300A, GL300N, GL300VC, GL300W.

shal

GTASC packet parsing with accelerometers calibration data is fixed. Enhanced corresponding message with new parameters:

self.calibration.state - device calibration status;
calibration.forward.x, calibration.forward.y, calibration.forward.z - forward calibration data;
calibration.side.x, calibration.side.y, calibration.side.z - side calibration data;
calibration.vertical.x, calibration.vertical.y, calibration.vertical.z - vertical calibration data;

YuryAheichyk

Queclink protocol has been updated:

added GTBCS, GTBDS reports parsing from GV58CEU

omol

Queclink protocol has been updated: added support of WID300/WID310 beacon models in GTBID report.

omol

Queclink protocol has been updated:

fixed GTCRA report parsing from GV53MG and GV75M
fixed GEO, FKS, NTS, DOG, DIS configuration sections parsing from GL320M

omol

Queclink protocol has been updated: fixed +ACK:GTBAS message parsing from GV58CEU, GV350CEU, GV355CEU.

omol

New device type support has been added: GV620MG.

omol

Queclink protocol has been updated: added support of GTHBE report from GB100, GB100MG, GB130MG, GV355CEU.

omol

Queclink protocol has been updated: added support of GTGSM report from GV350CEU.

YuryAheichyk

New device type support has been added: GV310LAU.

YuryAheichyk

Queclink protocol has been updated: fixed GTCAN parsing from GV65.

omol

Queclink protocol has been updated: added support of GTSCS report from GB130MG.