Queclink protocol is one of the most deeply integrated protocols in flespi telematics hub. Here is a guide how to obtain telematics data from Queclink devices over API . The following devices are supported Queclink GB100 Queclink GB100MG Queclink GB130MG Queclink TMR100MG Queclink GV50 Queclink GV50M Queclink GV53MG Queclink GV55 Queclink GV55N Queclink GV55 Lite Queclink GV55S Queclink GV55W Queclink GV56 Queclink GV57 Queclink GV65 Queclink GV75MG Queclink GV200 Queclink GV300 Queclink GV300CAN Queclink GV300N Queclink GV300L Queclink GV300W Queclink GV320 Queclink GV350CEU Queclink GV350M Queclink GV500 Queclink GV500MA Queclink GV500MAP Queclink GV500N Queclink GV500VC Queclink GV600 Queclink GV600M Queclink GV600MG Queclink GV620MG Queclink GV75 Queclink GV75W Queclink GV800 Queclink GMT100 Queclink GMT100N Queclink GMT200 Queclink GL50B Queclink GL50MG Queclink GL53MG Queclink GL100 Queclink GL100M Queclink GL200 Queclink GL300 Queclink GL300A Queclink GL300M Queclink GL300N Queclink GL300L Queclink GL300W Queclink GL300VC Queclink GL310M Queclink GL320M Queclink GL500 Queclink GL500M Queclink GL500N Queclink GL501M Queclink GL502MG Queclink GL505 Queclink GL520(M) Queclink GL521M Queclink GL530(M) Queclink GL530MG Queclink GT300 Queclink GS100 Queclink GT301 Queclink CV100LG Queclink GV58CEU Queclink GV355CEU Queclink GV310LAU Queclink GV58LAU Queclink CV200 Queclink GV305CEU Queclink GV57CEU Queclink GV57MGP Queclink GL53MGP Queclink GV500CG Queclink GV50CG QUeclink GB100CG

GTMAI report is supported. This report is sent to backend server when analog input voltage enters predefined alarm range. To configure alarm parameters of analog input ports use AT+GTMAI command. Applicable for Queclink GV200 device.

GTLOC packet is supported. This packet contains device real time position and is sent to the server after long press of a Function Key button. Function Key should be previously configured to work in Location mode by AT+GTFKS command. Applicable for Queclink GL300M device.

New device supported: Queclink GV50M

GTDRM packet is supported: device removal alarm. To enable this alarm use command AT+GTCFG with bit 17 of Event mask activated. Applicable for Queclink GV50 device.

GTIFG report parsing fixed for Queclink GMT200 devices.

GTLBS packet is supported for Queclink protocol.

New device supported: Queclink GL50B Parsing of GTSTR and GTCTN packets is fixed for this device type.

GTAIF report parsing fixed for Queclink GL300M devices.

GTBPL report parsing fixed for Queclink GL520 and GL530 devices.

Queclink protocol updated: Device type GL100 is renamed to GL100M (changes was automatically applied to all existing GL100 devices) GL100 legacy device type is added for queclink protocol (this device has different messages format - messages end with '\0' character)

[Changelog] queclink protocol

omol

Queclink protocol has been updated: added support of GTGSM for GL500 devices.

omol

New device type support has been added: GL500N.

omol

Queclink protocol has been updated: fixed Bluetooth Accessory Data parsing in GTERI reports from GB130MG.

omol

Queclink protocol has been updated: fixed GTDIS report parsing from GL320M.

YuryAheichyk

New device supported: Queclink GV58CEU

omol

New device type support has been added: GL521M.

omol

Queclink protocol has been updated:

fixed GTDOG report parsing from GL502MG
fixed RSSI value conversion in reports GTSOS, GTLBC, GTLTA, GTBPL, GTFRI, GTPNL, GTRTL, GTDOG, GTLSA, GTNMR, GTGEO, GTTEM from GL500M, GL501M, GL502MG, GL520(M)

omol

New device type support has been added: GL530MG.

omol

Queclink protocol has been updated:

added GTGSM report parsing for GV75W
added GTSPE report parsing for GV300W

omol

Queclink protocol has been updated: gsm.signal.dbm parameter (adjusted RSSI value) is now stored alongside with old network.signal.rssi parameter (raw RSSI value as is stored in reports). Old parameter will be removed on April 19th. Here is the list of affected devices:

omol

Queclink protocol has been updated: fixed parsing of CFG, DIS, IOB, TMA, GEO configuration sections in GTALM and GTALC reports received from GV800.

omol

Queclink protocol has been updated:

fixed parsing of UDF, BTS, BVS, BMS configurations sections from GV57
fixed parsing of JDC, BAS, CLT, GDO, SVR, DOS configuration settings form GV58CEU
adjusted positioning reports parsing from GL521M according to the latest protocol version

omol

Queclink procotol has been updated:

removed network.signal.rssi parameter as warned before
fixed GTBPL and GTDIS reports parsing received from GV300W

omol

Queclink protocol has been updated: fixed GTDIS report parsing from GL300M.

omol

Queclink protocol has been updated:

fixed GTINF report parsing from GL300A
fixed GTJDS report parsing from GV75W

omol

Queclink protocol has been updated:

fixed GTPFL and GTGEO reports parsing from GL300A
fixed UDF configuration setting parsing from GV50

omol

Queclink protocol has been updated:

fixed GTFRI report parsing from GV75M
fixed GTSPD, GTMON and GTSOS reports parsing from GV300W

omol

Queclink protocol has been updated:

fixed GTTOW, GTIOB, GTVGL, GTDOG, GTIGL, GTHBM reports parsing with non-zero Position Append Mask from GV300W
added support of GTGSM report parsing from GL520(M)
fixed GTTEM report parsing from GL505
fixed GTBPL Report parsing from GL50B

omol

Queclink protocol has been updated:

fixed GTAIF and GTINF reports parsing from GL53MG
fixed BSI, SRI, CFG, TMA, GEO, UPC, NMD configuration sections parsing from GL53MG
fixed GTDOG and GTBPL reports parsing from GL501M

omol

Queclink protocol has been updated:

fixed GTJDS report parsing from GV75W
fixed GTLBC and GTGSS reports parsing from GV55W