Queclink protocol is one of the most deeply integrated protocols in flespi telematics hub. Here is a guide how to obtain telematics data from Queclink devices over API . The following devices are supported Queclink GB100 Queclink GB100MG Queclink GB130MG Queclink TMR100MG Queclink GV50 Queclink GV50M Queclink GV53MG Queclink GV55 Queclink GV55N Queclink GV55 Lite Queclink GV55S Queclink GV55W Queclink GV56 Queclink GV57 Queclink GV65 Queclink GV75MG Queclink GV200 Queclink GV300 Queclink GV300CAN Queclink GV300N Queclink GV300L Queclink GV300W Queclink GV320 Queclink GV350CEU Queclink GV350M Queclink GV500 Queclink GV500MA Queclink GV500MAP Queclink GV500N Queclink GV500VC Queclink GV600 Queclink GV600M Queclink GV600MG Queclink GV620MG Queclink GV75 Queclink GV75W Queclink GV800 Queclink GMT100 Queclink GMT100N Queclink GMT200 Queclink GL50B Queclink GL50MG Queclink GL53MG Queclink GL100 Queclink GL100M Queclink GL200 Queclink GL300 Queclink GL300A Queclink GL300M Queclink GL300N Queclink GL300L Queclink GL300W Queclink GL300VC Queclink GL310M Queclink GL320M Queclink GL500 Queclink GL500M Queclink GL500N Queclink GL501M Queclink GL502MG Queclink GL505 Queclink GL520(M) Queclink GL521M Queclink GL530(M) Queclink GL530MG Queclink GT300 Queclink GS100 Queclink GT301 Queclink CV100LG Queclink GV58CEU Queclink GV355CEU Queclink GV310LAU Queclink GV58LAU Queclink CV200 Queclink GV305CEU Queclink GV57CEU Queclink GV57MGP Queclink GL53MGP Queclink GV500CG Queclink GV50CG Queclink GB100CG Queclink SC350M

Queclink protocol updated: Device type GL100 is renamed to GL100M (changes was automatically applied to all existing GL100 devices) GL100 legacy device type is added for queclink protocol (this device has different messages format - messages end with '\0' character)

[Changelog] queclink protocol

namo

Queclink protocol is one of the most deeply integrated protocols in flespi telematics hub.

Here is a guide how to obtain telematics data from Queclink devices over API.

The following devices are supported

namo

GTMAI report is supported.
This report is sent to backend server when analog input voltage enters predefined alarm range.
To configure alarm parameters of analog input ports use AT+GTMAI command.

Applicable for Queclink GV200 device.

namo

GTLOC packet is supported.
This packet contains device real time position and is sent to the server after long press of a Function Key button.
Function Key should be previously configured to work in Location mode by AT+GTFKS command.

Applicable for Queclink GL300M device.

namo

New device supported: Queclink GV50M

namo

GTDRM packet is supported: device removal alarm.
To enable this alarm use command AT+GTCFG with bit 17 of Event mask activated.

Applicable for Queclink GV50 device.

namo

GTIFG report parsing fixed for Queclink GMT200 devices.

namo

GTLBS packet is supported for Queclink protocol.

namo

New device supported: Queclink GL50B
Parsing of GTSTR and GTCTN packets is fixed for this device type.

namo

GTAIF report parsing fixed for Queclink GL300M devices.

namo

GTBPL report parsing fixed for Queclink GL520 and GL530 devices.

namo

Queclink protocol updated:

Device type GL100 is renamed to GL100M (changes was automatically applied to all existing GL100 devices)
GL100 legacy device type is added for queclink protocol (this device has different messages format - messages end with '\0' character)

namo

GTMON report is supported for queclink protocol. Applicable for GV300W devices.

namo

New device supported: Queclink GV500MA

namo

Output control settings are added for Queclink GV300 device, Input/Output tab.

namo

namo
Ouptut control settings are added also for Queclink GV300W device, Input/Output tab.

namo

Parsing of GTERI, GTGPJ reports fixed for Quelink GV350 device.

namo

New setting added for Queclink GV50m: Crash Detection, Configuration tab.

namo

GTCAN report parsing fixed for Queclink GV75W device.

namo

New setting added for Queclink GV350 device: Driving Behavior Alarm Configuration, Alarm tab.

namo

New setting added for Queclink GV350 device: Tow Alarm Configuration, Alarm tab.

namo

New setting added for Queclink GV350 device: Crash Alarm Configuration, Alarm tab.