• baja

  • Post #2
  • Edited

Settings added for OBD-II device type (obd_2, device_type_id=509) network_sim0, network_sim1, backend_server, backend_server2, wr_period, tracking, easylogic_get, easylogic_set, easylogic_clear, headpack1, mainpack1, canbus, shock

6 months later

Galileosky protocol is updated: parameter external.powersource.voltage.range.outside.status is renamed to external.powersource.voltage.status
Both old and new parameters are registered now. Old parameter will be removed 17-feb-2020.

    7 days later

    namo
    Old parameter removed.

        5 months later

        Galileosky switched to a new parsing engine.
        Parsing and out-coming traffic had been checked on a real device before migration.

          get_script channel level command (used to get EasyLogic scripts installed on device) will be removed in a week on Friday August 07. Custom command with payload "SCRIPT" can be used instead.
          Reason: protocol was moved to new parsing engine, though we try to avoid using commands without parameters.

            7 days later

            get_script channel level command removed

              7 months later
              4 months later

              • namo

              • Post #12
              • Edited

              Galileosky protocol is updated: added support for extended tags 0xFE.
              The following mapping takes place for Galileosky extended tag and flespi parameter:

              • 0x01 Tag Modbus 0 ... 0x20 Tag Modbus 31 - modbus.sensor.value.0 - modbus.sensor.value.31
              • 0x21 Tag Bluetooth 0 ... 0x60 Tag Bluetooth 63 - blutooth.sensor.value.0 - blutooth.sensor.value.63
              • 0x61 Tag Modbus 32... 0x80 Tag Modbus 63 - modbus.sensor.value.32 - modbus.sensor.value.63
              • 0x81 Cell identifier (CID) - gsm.cellid
              • 0x82 Local area code (LAC) - gsm.lac
              • 0x83 Country code (MCC) - gsm.mcc
              • 0x84 Operator code (MNC) - gsm.mnc
              • 0x85 RSSI - gsm.signal.dbm

              Applicable for Galileosky 7x series: Galileosky 7x, Galileosky 7x C, Galileosky 7x 3G, Galileosky 7x Plus, Galileosky 7x LTE

              6 months later

              • namo

              • Post #13

              Galileosky protocol updated, parameters

              • tyre.sensor.connection.status
              • tyre.sensor.battery.low.status
              • tyre.sensor.reason.enum

              are renamed to

              • tire.sensor.connection.status
              • tire.sensor.battery.low.status
              • tire.sensor.reason.enum

              Old parameters will be registered until 05-Jan-2022 together with the new ones. Old parameters will be removed 05-Jan-2022.

                4 months later

                The protocol will be affected by the change in type of parameters gsm.mcc and gsm.mnc to be installed in 2 weeks - May 23rd, 2022: both parameters that now have type "string" will be stored as "number". The possible leading zeroes in MNC will be ignored (e.g. the value "01" will be stored as 1).

                  11 days later

                  Galileosky protocol updated: the following parameters are renamed:

                  • rs485.fuel.sensor.level.0 - rs485.fuel.sensor.level.15 are renamed into rs485.lls.value.0 - rs485.lls.value.15 correspondingly
                  • rs485.fuel.sensor.temperature.0 - rs485.fuel.sensor.temperature.15 are renamed into rs485.lls.temperature.0 - rs485.lls.temperature.15 correspondingly

                  For backward compatibility, both old and new parameters will be registered until 13-Jun-2022.
                  13-Jun-2022 we will remove old parameters. Please make sure you code is fully transfered to the new parameters names until the mentioned date.

                    24 days later

                    namo
                    Galileosky protocol is updated: old parameters are removed after renaming.

                        4 months later

                        • baja

                        • Post #17

                        Bugfix:
                        parameter refrigerator.operate.mode.enum.2 was incorrectly overwritten by value for the parameter refrigerator.engine.mode.enum.2 . Now both parameter have correct values.

                        Bugfix schedule.

                        String value of indexed parameter (indexes 1,2,3) refrigerator.operate.mode.enum.1,2,3 is now also stored under refrigerator.operate.mode.1,2,3.
                        String value of indexed parameter (indexes 1,2,3) refrigerator.engine.mode.enum.1,2,3 is now also stored under refrigerator.engine.mode.1,2,3.

                        In one week (November 2, 2022), refrigerator.operate.mode.enum.1,2,3 and refrigerator.engine.mode.enum.1,2,3 will store raw numeric values.

                        9 days later

                        Galileosky protocol is updated: the following Extended tags are supported:

                        • 0x86 - 0x8D Temperature sensor - flespi parameters:
                          -- sensor.temperature.id.8 - sensor.temperature.id.15
                          -- sensor.temperature.8 - sensor.temperature.15
                        • 0x8E GPS satellite information - flespi parameters:
                          -- gps.visible.satellites
                          -- gps.position.satellites
                          -- gps.average.snr
                          -- gps.max.snr
                        • 0x8F GLONASS satellite information - flespi parameters:
                          -- glonass.visible.satellites
                          -- glonass.position.satellites
                          -- glonass.average.snr
                          -- glonass.max.snr
                        • 0x90 BEIDOU satellite information - flespi parameters:
                          -- beidou.visible.satellites
                          -- beidou.position.satellites
                          -- beidou.average.snr
                          -- beidou.max.snr
                        • 0x91 GALILEO satellite information - flespi parameters:
                          -- galileo.visible.satellites
                          -- galileo.position.satellites
                          -- galileo.average.snr
                          -- galileo.max.snr
                        • 0x92 Active SIM IMSI - flespi parameter gsm.sim.imsi
                        • 0x93 Currently used SIM card slot - flespi parameter sim.card.slot
                        • 0x94 Active SIM ICCID - flespi parameter gsm.sim.iccid

                        baja scheduled bugfix installed

                            9 months later

                            Galileosky protocol is updated: the following Extended tags are supported:

                            • 0xFD - 0xFE iButton code - flespi parameters:
                              -- ibutton.code.1 - ibutton.code.2
                            a month later

                            Attention. Changing the naming of parameters.
                            Due to a grammar mistake in the name, the parameter blutooth.sensor.value[index] will be renamed to bluetooth.sensor.value[index]
                            The new parameter has already been added to the registration. The old one will be removed on October 1, 2023. If you need more time please contact us via support chat.

                              12 days later

                              EvgenyShatilo Сhanging the naming of parameters.
                              blutooth.sensor.value[index] has been removed.

                                  13 days later

                                  Galileosky protocol has been updated, added tags parsing:

                                  • 0x78 - 0x7D Input 8 - 13 value - flespi name ain.9 - ain.14
                                  • 0x49 Transmission channel - flespi name network.type.enum
                                  • 0x00FC Reason for recording an archive point - flespi name report.reason