Eelink protocol is supported in flespi telematics hub. The list of supported devices Eelink TK115 Eelink TK116 Eelink TK119 Eelink TK121 Eelink TK319 Eelink TK419 Eelink K30 Eelink GPT12 Eelink GPT15 Eelink GPT18 Eelink GPT19

New settings are added for Eelink TK319 , Eelink TK418-S and Eelink TK419 devices: Info tab, settings Manager 1 - Manager 4 - allows to configure manager's phone numbers and aliases Geofence tab: Geofence 1 - Geofence 8 - allows to configure geofences for geo alarm feature

Eelink protocol is updated: Pedometer package 0x1A is supported. The following flespi parameters are registered: UTC time of last day - report.timestamp Accumulated steps in total - total.steps.count Accumulated walking time in total - total.walk.time Accumulated walking distance in total - total.walk.distance Accumulated burnt energy in total - total.burnt.enery Accumulated steps in last day - steps.count Accumulated walking time in last day - walk.time Accumulated walking distance in last day - walk.distance Accumulated burnt energy in last day - burnt.enery

[Changelog] eelink protocol

namo

Eelink protocol is supported in flespi telematics hub.
eelink

The list of supported devices

namo

PID 0x14 Warning package is supported for eelink protocol.

namo

PID 0x16 Message package is supported for eelink protocol.

namo

Fixed parsing of optional fields for PID 0x12 Location package

namo

Eelink protocol updated: added custom command.
It allows to send any configuration command to the device connected to flespi channel using PID 0x80 Instruction package.

namo

Eelink protocol updated: UDP communication transport added.

Currently UDP transport works only for incoming traffic. Commands over UDP are under development.

namo

Eelink protocol is updated: fixed parsing of wifi.signal.strength parameter, so that it has negative value (dBm) now.

baja

The protocol will be affected by the change in type of parameters gsm.mcc and gsm.mnc to be installed in 2 weeks - May 23rd, 2022: both parameters that now have type "string" will be stored as "number". The possible leading zeroes in MNC will be ignored (e.g. the value "01" will be stored as 1).

namo

Eelink protocol is updated: added settings for Eelink TK419.
Also added the following alarm settings, Alarms tab:

Speed Alarm
Motion Alarm
Shift Fence

namo

New settings are added for Eelink TK319, Eelink TK418-S and Eelink TK419 devices:

Info tab, settings Manager 1 - Manager 4 - allows to configure manager's phone numbers and aliases
Geofence tab: Geofence 1 - Geofence 8 - allows to configure geofences for geo alarm feature

namo

Eelink protocol is updated: Pedometer package 0x1A is supported. The following flespi parameters are registered:

UTC time of last day - report.timestamp
Accumulated steps in total - total.steps.count
Accumulated walking time in total - total.walk.time
Accumulated walking distance in total - total.walk.distance
Accumulated burnt energy in total - total.burnt.enery
Accumulated steps in last day - steps.count
Accumulated walking time in last day - walk.time
Accumulated walking distance in last day - walk.distance
Accumulated burnt energy in last day - burnt.enery

YuryAheichyk

Fixed VERSION, PARAM commands response parsing

YuryAheichyk

Added Beacon data parsing

namo

Eelink protocol is updated: parsing of Wifi and BLE MAC addresses is refactored.

bird

Fixed parsing of MOTION setting response for tk319, tk418_s, tk419 devices when motion alarm is disabled.

bird

Fixed status word parsing: gnss.status and obd.connected.status now read the correct bits (previously shifted by one). DIN3 input is now parsed. New parameter movement.status added (device active/stationary state).

namo

Eelink protocol is updated: fixed parsing BLEID and RSSI fields of BEACON data type.

bird

New device type added: Eelink GPT47

New device type added: Eelink GPT48-X

Sleeping-heartbeat (0xE0) and sleep-mode temperature/humidity uploads (0x10) are supported for Eelink GPT47 and GPT48-X.

New settings added for all Eelink GPT devices: Network Setup (APN), Server Setup (SERVER), TCP Heartbeat (HBT) and Location Collection (COLLECT).

Additional settings added for Eelink GPT47 and GPT48-X: UDP Polling (POLLING) and Sleep Sampling (SLEEP).

namo

Eelink protocol is updated: fixed parsing of warnings types 0x01 External power cut-off and 0x02 SOS in warning package 0x014.