[Changelog] dct-syrus protocol

namo

dct-syrus protocol is supported in flespi telematics hub.

Supported devices:

baja

integer parameter position.fix.type showing if the position is 2D (value = 1), 3D (value = 2) or not fixed (value = 0) added
boolean parameter position.corrected.status showing if ground base stations DGPS used to correct satellite-sourced position

namo

DCT-Syrus protocol is updated: tag IO: Inputs and Outputs state is supported. The following flespi parameters are registered for the IO tag:

IO=ABC;

A, bit0 Ignition - engine.ignition.status, boolean
A, bit1 Main Power Source - external.powersource.status, boolean and backup.battery.status, boolean
B, bit0 Output 1 - dout.1, boolean
B, bit1 Output 2 - dout.2, boolean
C, bit0: Input 1 - din.1, boolean
C, bit1: Input 2 - din.2, boolean
C, bit2: Input 3 - din.3, boolean

namo

DCT-Syrus protocol is updated: added new tags:

CV11 - flespi parameter counter.value.11
CV12 - flespi parameter counter.value.12
CV13 - flespi parameter counter.value.13
CV14 - flespi parameter counter.value.14
CV15 - flespi parameter counter.value.15
CV16 - flespi parameter counter.value.16
SC - the following flespi parameters are registered:
- 2G/3G - gsm.network.type
- Mobile Country Code - gsm.mcc
- Mobile Network Code - gsm.mnc
- Location area code - gsm.lac
- Cell identifier - gsm.cellid
- RSSI level - gsm.signal.level

namo

DCT-Syrus protocol is updated: added new event tag CC. The following flespi.parameters are registered for its components:

gsm.count - GSM counter. Number of times that the Syrus has registered on GSM network
gprs.count - GPRS counter. Number of times that the Syrus has registered on GPRS network
gprs.bearer.count - GPRS Bearer counter. Number of times that the GPRS bearer has changed from down to up
retransmission.count - Retransmissions counter. Number of retries for transmitting events when the Syrus does not received an ACK from pegasus gateway
bytes.sent - Number of bytes transmitted by Syrus
bytes.received - Number of bytes received by Syrus
packets.sent - Transmission counter. Number of messages transmitted by the Syrus via GPRS
acknowledgement.time - Acknowledge time. It is an accumulative time counter that it is incremented with the time that the application waits for the acknowledge of an event triggered

namo

DCT-Syrus protocol is updated:

fixed parsing of negative acceleration values, AC tag
added skipping of TX message

namo

DCT-Syrus protocol is updated: added new event tag:

VI - flespi parameter vehicle.altitude.change

namo

DCT-Syrus protocol is updated: added parsing of TX messages that are sent from peripheral device in MDT communication mode. The payload of the TX message is stored in to payload.text flespi parameter.

namo

DCT-Syrus protocol is updated: added parsing of the following reports:

ER Error Report, flespi parameters registered for this type of report are:
```
{
  "error.code": 4,
  "error.command": "SET99SV0;F00+;ACT=SGC01TR00330",
}
```
ED Event Definition, flespi parameter registered for this type of report is:
```
{
  "event.definition": "99SV0;F00+;ACT=SGC01TR00330;KY=Q658"
}
```

namo

DCT-Syrus protocol is updated:

GC Report is skipped and won't cause unsupported packet GC parsing error any more
added processing of heartbeat packets

YuryAheichyk

New device type support has been added: Syrus Lynx.

YuryAheichyk

DCT-Syrus protocol is updated, fixed GTERI, GTFRI reports for Syrus Lynx device.

YuryAheichyk

DCT-Syrus protocol is updated, fixed Custom command for Syrus Lynx device.

YuryAheichyk

Device Syrus Lynx has been migrated to the btg-iot protocol

YuryAheichyk

Device Syrus Lynx has been returned to the dct-syrus protocol

YuryAheichyk

DCT-Syrus protocol is updated, fixed Device Status field parsing for GTFRI, GTERI reports from Syrus Lynx device.

YuryAheichyk

DCT-Syrus protocol is updated, fixed GTBAA report parsing, added parsing of GTUPD report from Syrus Lynx device